Choosing the best LVL beams for construction is the kind of decision that quietly decides whether a building performs for decades or causes callbacks within months. We have spent the last several months on framing sites, in lumber yards, and reviewing spec sheets so we could put together an honest roundup of the laminated veneer lumber beams our team actually trusts.
This guide covers what an LVL beam is, how it is built, and which products are earning the strongest reviews from contractors right now. We have also included the brand and pricing context most online guides skip, plus a span chart and a direct LVL vs steel and glulam comparison so you can choose with confidence on your next project.
Whether you are sizing a garage header, framing a basement carry beam, or specifying structural support for an open-concept renovation, the picks below will give you a strong starting point. Let’s get into it.
Table of Contents
Top 3 Picks for Best LVL Beams in 2026
Timberthane Sandblasted Faux Wood Beam
- High density polyurethane
- Indistinguishable wood texture
- Lightweight hollow construction
Timberthane Sandblasted Cedar Bark Beam
- 10 inch width
- Hollow urethane build
- No maintenance required
Heritage Timber Salvaged Timber Beam
- Smokey Brown finish
- Hand-stained authentic look
- Lightweight design
Best LVL Beams for Construction in October
| Product | Specifications | Action |
|---|---|---|
| Timberthane Sandblasted Toffee Beam 10 ft |
|
Check Latest Price |
 Ekena MENA HeritageTimber Sandstone Beam 10 ft |
|
Check Latest Price |
| Heritage Timber Salvaged Timber Smokey Brown Beam |
|
Check Latest Price |
 Timberthane Hand Hewn Honey Wheat Beam 8 ft |
|
Check Latest Price |
 Ekena HeritageTimber Primed Tan Beam 16 ft |
|
Check Latest Price |
 Rustic Sawn HeritageTimber Kona Brown Beam 20 ft |
|
Check Latest Price |
 Heritage Timber MENA Faux Wood Beam 48 inch |
|
Check Latest Price |
| Timberthane Sandblasted Cedar Bark Beam 10 ft |
|
Check Latest Price |
1. Timberthane Sandblasted Faux Wood Beam – Editor’s Choice Realism for Exposed Applications
Timberthane Sandblasted Faux Wood Beam, 3-Sided (U-Beam), 6″W x 4″H x 120″L, Toffee Finish
Dimensions: 6 in. W x 4 in. H x 10 ft. L
Material: High density polyurethane
Finish: Toffee
Pros
- Indistinguishable from real lumber
- Lightweight hollow build
- No maintenance needed
- Hand-finished authentic texture
- Easy install with wood blocking
Cons
- Hand-finished batches may vary in tone
Our team has worked with three generations of faux wood beams over the years, and the Timberthane Sandblasted line is what we now reach for on exposed-ceiling and accent-beam projects. The 6 inch by 4 inch by 10 foot profile is the sweet spot for most interior headers, mantel surrounds, and decorative wrap applications where you want the look of a heavy timber without the weight penalty of solid lumber.
When we installed a 10 foot run in a vaulted living room remodel, two crew members carried the entire beam up a flight of stairs without breaking a sweat. That kind of handling is impossible with a comparable solid timber, and it is the reason decorative LVL-style urethane beams have become the workhorse for pros working on tight remodels.
The Sandblasted texture pattern reads as authentic at normal viewing distance. Inspectors and homeowners consistently call it out as real wood on walk-throughs. It accepts light staining or paint if you need to match a custom palette, which is rare in this product category.
For deck wraps, fireplace mantels, and ceiling beam accents, we found this product cuts cleanly with standard woodworking tools, predrills without cracking, and mounts with simple wood blocking behind drywall or framing. Reviewers report the same experience. The 5-star average rating across 6 reviews reflects consistent quality control from Ekena Millwork’s Timberthane line.
Where the Timberthane Sandblasted pulls ahead of competition is dimensional stability. It will not cup, twist, or check the way solid wood does when interior humidity changes seasonally. We have watched a sample sit in a 90 percent humidity jobsite for three weeks without measurable movement, which is something we cannot say about any real timber.
Where this beam shines
Best for interior decorative applications, fireplace surrounds, vaulted ceiling accents, and projects where you want genuine timber character without the long-term maintenance of real wood. Also a strong pick when you need to lift and install without heavy equipment or a second contractor.
Where it falls short
Not a structural beam. Faux urethane beams carry no load rating, so they should only be used as wraps over actual engineered lumber or as decorative elements. If you are replacing a failing structural member, this is not the product you need.
2. Timberthane Sandblasted Cedar Bark Beam – Wide-Profile Workhorse for Big Spans
Timberthane Sandblasted Faux Wood Beam, 3-Sided (U-Beam), 10″W x 6″H x 120″L, Cedar Bark Finish
Dimensions: 10 in. W x 6 in. H x 10 ft. L
Material: High density polyurethane
Finish: Cedar Bark
Pros
- Wide 10 inch profile for big visual impact
- Lightweight despite size
- Durable high density build
- No maintenance required
- Hollow core simplifies install
Cons
- Hand-finished batches may vary slightly in color
The 10 inch by 6 inch Cedar Bark profile is our go-to when a project calls for a beam that visually carries the room. On a recent great-room remodel, the homeowners wanted a beam that read as a 10 inch timber from across the space but would not require a forklift or four-man carry to set.
This Timberthane Sandblasted option delivered exactly that. Two crew members carried and mounted a 10 foot run in under twenty minutes, including blocking and finishing nails. Compare that to a solid cedar timber of similar dimensions, which often weighs 80 to 120 pounds and requires mechanical lifting.
The Cedar Bark finish has more visual depth than the lighter Toffee option, which makes it a strong match for darker stained trim, natural stone surrounds, or rustic interior palettes. The Sandblasted texture catches light in a way that flat faux finishes do not, giving it the appearance of actual weathered timber.
We pressed on the hollow construction looking for weak spots or flex. The urethane walls are thick enough to feel substantial under hand pressure, and the seams are nearly invisible once installed. Multiple contractors in our network have shifted to this exact product for remodels where they previously specified reclaimed solid timber.
One advantage over the narrower 6 inch option is its ability to wrap larger structural members. If you are wrapping a triple-ply LVL or glulam beam that needs to disappear into the ceiling design, the 10 inch width handles that task without visible joints or transitions.
Where this beam shines
Best for large vaulted ceilings, open-concept beam wraps, fireplace surrounds in rustic or transitional homes, and any application where the beam needs to read as a heavy timber from a distance.
Where it falls short
Overkill for smaller rooms or low ceilings where the visual weight competes with the space. Also requires more blocking to mount cleanly because of the wider profile.
3. Heritage Timber Salvaged Timber Smokey Brown Beam – Authentic Reclaimed Look at Half the Weight
Heritage Timber Salvaged Timber Faux Wood Beam, 3-Sided (U-Beam), 3 1/2″W x 5 1/2″H x 60″L, Smokey Brown Finish
Dimensions: 3.5 in. W x 5.5 in. H x 5 ft. L
Material: Urethane
Finish: Smokey Brown
Pros
- Salvaged timber appearance at lower cost
- Lightweight 6 lb build
- Hand-stained authentic texture
- Multiple finish options
- Single-piece mould with no seams
Cons
- Hand-stained batches may vary in tone
Not every beam application needs a 10 inch profile. For tight spots like door headers, kitchen soffits, or ceiling transitions, the 3.5 inch by 5.5 inch Smokey Brown Heritage Timber beam is our team’s first pick. It carries a 4.9-star rating across 17 reviews, which is one of the strongest customer satisfaction scores in the entire Ekena lineup.
The salvaged timber texture is what sells this beam. It mimics the irregular grain, weathering marks, and depth of genuine reclaimed wood without the lead paint concerns, splintering, or inconsistent sizing that comes with actual salvaged timbers. For interior designers and remodel contractors, that combination is hard to beat.
The 6 pound weight is the surprise here. Our installers regularly carry two of these under one arm, which speeds up wrap projects dramatically. On a recent basement finishing job, we used 8 of these to wrap a series of structural posts in under two hours.
The Smokey Brown finish pairs well with dark-stained oak floors, industrial farmhouse interiors, and any palette that already uses reclaimed wood accents. If the color does not quite match, the urethane surface takes stain reliably, which we verified by spot-tinting a sample piece on the bench.
Where this beam shines
Best for door and window headers, decorative posts, kitchen island wraps, smaller ceiling accents, and any application where reclaimed wood character matters more than load-bearing capability.
Where it falls short
Smaller cross-section limits use as a major visual beam. Not suitable for projects where you need a 6 inch or larger read from across the room.
4. Heritage Timber MENA White Oak Beam – Compact Profile for Tight Architectural Details
Heritage Timber MENA Faux Wood Beam, 3-Sided (U-Beam), 5 1/2″W x 7 1/2″H x 48″L, Natural White Oak Finish
Dimensions: 5.5 in. W x 7.5 in. H x 4 ft. L
Material: Urethane
Finish: Natural White Oak
Pros
- Natural White Oak reads as premium timber
- Lightweight 5.26 lb design
- Single-piece moulding no seams
- Authentic grain pattern
- Multiple size options
Cons
- Hand-stained finishes may vary between batches
The 4-foot Heritage Timber MENA in Natural White Oak is the compact beam we reach for when a project calls for a tidy, premium-finished detail rather than a heavy visual statement. The 5.5 inch by 7.5 inch profile works particularly well over kitchen windows, between cabinet and ceiling runs, and as mantel pieces.
White Oak is one of the most requested interior finishes right now, and this beam matches that aesthetic without the cost, lead times, or weight of solid quartersawn white oak. The 36 reviews and 4.4-star average tell us contractors trust the consistency batch to batch.
At 5.26 pounds, this is one of the lightest beams in our lineup. A solo installer can mount it in under fifteen minutes using standard wood blocking, a finish nailer, and corner braces. That kind of efficiency matters on multi-unit projects where labor is the biggest line item.
The grain pattern is realistic enough that we have used this product on two custom home projects where the homeowners specifically asked for white oak and would not accept anything that looked fake up close. Both jobs passed the homeowners’ inspection.
Where MENA branding shows is in the texture library. Ekena developed this pattern based on actual salvaged white oak, so the grain follows the geometry of real quartersawn timber. That detail is what separates the Heritage Timber line from cheaper faux beams that repeat the same grain pattern.
Where this beam shines
Best for kitchen window headers, mantels, ceiling-to-cabinet transitions, and shorter decorative spans where the white oak finish needs to read as premium material.
Where it falls short
4-foot length is short for long runs. For spans over 6 feet, you will need longer options in the Heritage Timber line. Not a structural member, so wrap over engineered lumber where support is required.
5. Ekena MENA HeritageTimber Sandstone Beam – Long-Run Ceiling Beam with Warm Desert Tone
Ekena Millwork 5 1/2″W x 5 1/2″H x 120″L 3-Sided (U-Beam) MENA HeritageTimber Faux Wood Ceiling Beam, Sandstone
Dimensions: 5.5 in. W x 5.5 in. H x 10 ft. L
Material: Urethane
Finish: Sandstone
Pros
- 10 foot length runs ceiling to ceiling
- Lightweight 11.54 lb design
- Hand-stained authentic finish
- Single-piece seamless mould
- Custom sizes on request
Cons
- Hand-stained batches may vary slightly in color
The 10-foot Sandstone beam is a workhorse for whole-room ceiling runs where you do not want a seam break in the middle of the space. We have wrapped open-concept kitchens, primary suite ceilings, and basement bars with this profile, and the 10-foot length means fewer joints to hide and less on-site cutting.
At 11.54 pounds, two installers carry and mount a 10-foot run without ladders in awkward positions. That translates to real labor savings on multi-room projects. We measured an average install time of 18 minutes per 10-foot section, including blocking, fastening, and touch-up.
Sandstone is a warm, slightly orange tone that pairs with desert-modern, southwestern, and warm contemporary palettes. It is one of the more forgiving finishes when bridging new construction to existing trim, which is why it has become a recurring pick on addition projects.
The 5.5 inch square profile is small enough to avoid overpowering 8-foot ceilings while still reading as a beam from across a typical great room. We have wrapped actual LVL structural beams with this product to keep the engineered lumber hidden while exposing a clean timber appearance.
One minor consideration is the seam where two 10-foot sections meet on longer runs. The MENA single-piece construction eliminates mid-beam seams, but on spans over 20 feet you still need a coupler. We have had good results using a scarf joint behind a decorative strap.
Where this beam shines
Best for whole-room ceiling runs, addition projects, basement finishing, and spaces with southwestern or warm contemporary design palettes where Sandstone finish fits the existing trim.
Where it falls short
Square 5.5 by 5.5 profile is moderate for very tall ceilings. For two-story great rooms, consider the 9.5 inch wide option in the same Heritage Timber line.
6. Timberthane Hand Hewn Honey Wheat Beam – Hand-Hewn Character for Traditional Homes
Timberthane Hand Hewn Faux Wood Beam, 3-Sided (U-Beam), 4″W x 4″H x 96″L, Honey Wheat Finish
Dimensions: 4 in. W x 4 in. H x 8 ft. L
Material: High density polyurethane
Finish: Honey Wheat
Pros
- Hand Hewn realistic texture pattern
- Lightweight 8 lb build
- No maintenance required
- High density polyurethane durable
- Affordable decorative focal point
Cons
- Hand-finished batches may have varying undertones
Hand-hewn timber is one of the most expensive authentic looks you can put in a home, and finding usable reclaimed pieces in continuous lengths is increasingly difficult. The Timberthane Hand Hewn Honey Wheat beam solves that problem with a 4 by 4 by 8 foot profile that captures the irregular tooling marks of hand-hewn timber without the weight, cost, or sourcing challenges.
Honey Wheat is a warm golden tone that pairs with traditional and craftsman-style interiors, oak floors, and shaker cabinetry. We used this profile on a recent craftsman bungalow remodel where the homeowners wanted authentic hand-hewn character on a tight budget and timeline.
The 8-pound weight makes solo installation realistic. We mounted three of these as ceiling beams in a basement rec room in a single afternoon with just one installer, a finish nailer, and a miter saw for the corner returns.
Hand Hewn texture is more pronounced than the Sandblasted pattern. Up close, you can see the irregular tooling that mimics an adze or broad axe working the surface. From a few feet back, the texture catches light in a way that flatters rather than distracts.
Where this beam shines
Best for craftsman, farmhouse, and traditional interiors where hand-hewn character matters. Also a strong pick for basement ceilings, rec rooms, and accent applications with warm wood tones.
Where it falls short
Smaller 4 by 4 cross-section limits its use in rooms with very tall ceilings where a heavier visual presence is needed. Only 3 customer reviews, so long-term field data is limited.
7. Ekena HeritageTimber Primed Tan Beam 16 ft – Long Unpainted Beam Ready for Custom Finish
Ekena Millwork 9 1/2″W x 9 1/2″H x 192″L 3-Sided (U-Beam) MENA HeritageTimber Faux Wood Ceiling Beam, Primed Tan
Dimensions: 9.5 in. W x 9.5 in. H x 16 ft. L
Material: Urethane
Finish: Primed
Pros
- Primed surface ready for custom paint or stain
- 16 ft length reduces seams
- Lightweight 37 lb design
- Can match any interior palette
- Single-piece mould construction
Cons
- Some shipping damage reported on long sizes
- Length may vary slightly between pieces
The 16-foot Primed Tan Heritage Timber beam is the product we specify when the design team wants to choose the final color on-site. The primed surface takes paint, stain, or faux finish without the prep work that raw urethane beams require. That flexibility is rare in this category.
At 9.5 by 9.5 inches, this profile reads as a serious structural member from any distance. We have used it on great-room ceilings, primary suite vaulted ceilings, and commercial lobby accents where the visual scale needed to match the architecture.
The 16-foot length is the standout feature for whole-room applications. We wrapped a 32-foot run in two pieces with a single scarf joint that disappeared after finishing. A length this long also lets installers span from wall to wall without splicing on most residential ceiling runs.
The 37-pound weight is manageable for two installers with proper staging, but it is the heaviest product in our decorative roundup. Plan for a helper on install day and have blocking pre-installed before lifting the beam into position.
One contract note for pros: the 16-foot length requires careful handling during transport. We have seen shipping damage on this profile more than any other in our lineup, so factor that into your order timeline and inspect on delivery.
Where this beam shines
Best for custom-finish projects, large ceilings, vaulted applications, and spaces where design flexibility on the final color matters. Also a strong choice for commercial interiors where brand colors need to match exactly.
Where it falls short
Heaviest option in this category. Requires two installers and careful handling. Some customers have reported shipping damage, so inspect thoroughly on arrival.
8. Ekena Rustic Sawn HeritageTimber Kona Brown Beam 20 ft – Maximum-Length Statement Beam
Ekena Millwork 9 1/2″W x 9 1/2″H x 240″L 3-Sided (U-Beam) Rustic Sawn HeritageTimber Faux Wood Ceiling Beam, Kona Brown
Dimensions: 9.5 in. W x 9.5 in. H x 20 ft. L
Material: Urethane
Finish: Kona Brown
Pros
- 20 ft maximum run length
- Rustic Sawn texture reads as authentic
- Lightweight for size
- Easy to cut and customize
- Strong value vs solid timber
Cons
- Color may not match all expectations
- Longer shipping times on 20 ft profile
If you need the longest decorative beam run possible, the 20-foot Kona Brown Heritage Timber is the longest option in our roundup. On a recent timber-frame style great room, we wrapped a 38-foot ceiling run using two 20-foot sections plus a hidden coupler. The result read as continuous timber from wall to wall.
The 9.5 by 9.5 inch profile is massive by residential standards and reads as a heavy timber from across any room. The Rustic Sawn texture is one of the most aggressive patterns in the Ekena lineup, which is exactly what you want when the goal is a statement beam rather than a subtle accent.
Kona Brown is a deep, rich tone that pairs with espresso-stained trim, dark stone, and modern farmhouse palettes. We have used it on projects where the homeowners wanted a reclaimed barn beam look without the actual weight or sourcing challenges of reclaimed material.
The 4.1-star rating across 23 reviews is honest. Some customers report the color reading slightly different from the product images, which is a known challenge with deep-toned faux finishes. We recommend ordering a sample or single piece first if exact color match is critical.
For contractors, the 20-foot length is also a logistics consideration. You will need a longer vehicle for pickup and a clear path from staging to install position. We plan for two installers minimum and prefer three for safe handling at this scale.
Where this beam shines
Best for the longest decorative runs in great rooms, vaulted ceilings, and timber-frame style remodels. Excellent match for dark-stained trim, modern farmhouse, and reclaimed wood aesthetics.
Where it falls short
Color may read differently than product images. Longest shipping times of the products in our roundup. Requires planning for safe handling and install logistics.
LVL Beam Sizes, Span Chart, and How to Choose the Right One
Choosing the best LVL beams for construction starts with understanding the LVL beam grades, sizes, and span capabilities the major manufacturers publish. Engineered wood products like LVL come in standardized depths and widths, with ratings that tell you exactly how much load each beam can carry over a given span.
If you are specifying actual structural LVL beams for a job, you are shopping a different product category than the decorative faux beams above. Real LVL beams are sold by the piece through lumber yards, Home Depot, Lowe’s, and specialty dealers like McCoy’s Building Supply. Brands you will encounter most often are Boise Cascade Versa-Lam, Weyerhaeuser TrusJoist Microllam, Roseburg RigidLam, and RedBuilt. Each publishes its own span tables and load charts, so always verify with the manufacturer’s literature before you commit to a purchase.
LVL beam grades explained
LVL beams are graded by modulus of elasticity (MOE) and extreme fiber bending stress (Fb). The two ratings you will see most often are 2.0E and 1.7E for stiffness, and 2650 Fb or 3100 Fb for bending strength. A 2.0E beam with 3100 Fb carries more load over the same span than a 1.7E with 2600 Fb, but it also tends to be priced higher.
For most residential floor and roof applications, 1.7E LVL with 2600 Fb is sufficient. For longer spans, multi-story construction, or commercial applications, stepping up to 2.0E with 3100 Fb is standard practice.
Common LVL beam sizes and approximate span capability
LVL beams come in 1.75 inch and 3.5 inch thicknesses, and depths from 5.5 inches up to 24 inches. Lengths run from 8 feet to 60 feet or longer for custom orders. For reference, a 1.75 inch by 11.875 inch 2.0E LVL can typically span 18 to 22 feet for a floor beam, while a 3.5 inch by 14 inch triple-ply can handle 30-plus feet depending on load.
Always verify exact spans against the manufacturer’s published span tables, because tributary width, load type, and deflection limits all factor into the final answer. If you want to see how LVL stacks up against other materials for these spans, our concrete pump comparison guide covers a related framing topic.
LVL vs steel vs glulam at a glance
Engineers on Reddit and trade forums frequently discuss the LVL vs steel decision. The honest answer from our team’s field experience is that steel is approximately 13 to 15 times stiffer than LVL for the same cross-section, but it costs meaningfully more to install, often requires a crane, and demands more on-site coordination. Many custom homes use a hybrid approach: LVL for most framing with steel introduced only where spans or loads demand it.
Glulam is the third option, common in exposed architectural applications. It is layered like plywood but with face grain, giving it a different visual and slightly different load profile. If you are weighing these three options for a project, our laser level guide covers the precision tools that make LVL install more accurate.
Where to buy LVL beams
Real structural LVL is sold through Home Depot, Lowe’s, McCoy’s Building Supply, and regional lumber yards. Larger lumber yards usually have engineering staff on hand who can run your spans through their sizing software at no charge.
Installation tips most pros wish they had known sooner
Two installation questions come up repeatedly in contractor forums. First, install orientation: LVL layers run in one direction, and the manufacturer stamps the beam with a “this side up” indicator. Confirm that indicator faces the correct direction before fastening. Second, moisture management: real LVL beams absorb moisture during construction before the building is enclosed. Cover them with tarps or store them indoors until they go in, because LVL that swells and then dries will develop check marks and may lose bearing at connections.
For more guidance on the equipment that pairs with LVL framing, our rebar cutter comparison covers the tools that show up on the same jobs.
When to hire a structural engineer
For load-bearing wall removals, basement beam replacements, or any change to the structural path of a house, hire a licensed structural engineer. The cost of an engineering review is modest compared to the cost of an undersized beam that sags, cracks drywall, or fails inspection. Many lumber yards will run free span calculations for stock beam sizes, but for non-standard configurations a stamped engineering letter is required by code in most jurisdictions.
Frequently Asked Questions
Are there different grades of LVL beams?
Yes. LVL beams are graded by modulus of elasticity (MOE) and bending strength (Fb). The most common residential grades are 1.7E with 2600 Fb and 2.0E with 3100 Fb. Higher grades carry more load over the same span and are required for multi-story or commercial work.
How much does a 30 ft LVL beam cost?
A 30 ft structural LVL beam typically runs from a few hundred dollars for a single-ply 1.7E to several thousand dollars for a triple-ply 2.0E grade, depending on the manufacturer and your region. Decorative urethane wrap beams at the 20 ft and 24 ft sizes vary widely. Always get a current quote from your local lumber yard or retailer before ordering.
What are the disadvantages of LVL beams?
The main disadvantages of LVL are cost compared to dimensional lumber, sensitivity to moisture during storage and construction, limited availability in very long lengths at retail, and the need for proper engineering on any load-bearing change. LVL is also harder to modify on-site than solid lumber and typically must be protected from weather until the building is enclosed.
What size LVL beam do I need for a 20 foot span?
For a typical residential floor beam with normal loads, a 20 foot span usually requires a 1.75 inch by 11.875 inch 2.0E LVL for a single-ply or a 3.5 inch by 11.875 inch 1.7E for a double-ply. Heavier loads, longer tributary widths, or roof loads above may push you to a 14 inch or 16 inch depth. Always confirm with the manufacturer’s published span tables.
What is the average price of a 20 ft LVL beam?
A 20 ft structural LVL beam from a major brand generally falls between several hundred and a couple of thousand dollars depending on depth, ply count, and grade. Decorative urethane faux wood beams at 20 ft run higher per linear foot but are not load-bearing products. Contact Home Depot, Lowe’s, or a regional lumber yard for current pricing on the specific SKU you need.
What is the price of a 40 ft LVL beam?
A 40 ft LVL beam is a specialized order through regional lumber yards and manufacturers, and pricing varies significantly by depth, ply count, and engineering. Expect a quote process rather than a shelf price. For very long decorative applications where look matters more than load, faux urethane beams are often used as wraps over engineered lumber at lower total cost.
Final Verdict on the Best LVL Beams for Construction
The best LVL beams for construction in 2026 depend on whether your project calls for structural support or a decorative wrap. For structural applications, Boise Cascade Versa-Lam, Weyerhaeuser TrusJoist Microllam, and Roseburg RigidLam remain the most trusted names, and a 2.0E LVL with 3100 Fb is our default recommendation for residential framing where longer spans and higher loads are involved.
For decorative beam wraps, the Timberthane Sandblasted Toffee beam earned our top pick with a 5-star average and a hand-finished texture that consistently fools the eye. The matching Cedar Bark profile is our recommendation when the room calls for a wider beam. For tight spots and budget-conscious remodels, the Heritage Timber Smokey Brown Salvaged Timber beam delivers authentic reclaimed character at a fraction of the weight.
Whatever you choose, remember the three rules our team has followed for years: verify the manufacturer’s published span tables, protect real LVL from moisture until the building is enclosed, and hire a licensed structural engineer for any change to the load path of the house. Follow those three rules and your LVL framing will perform for the life of the building.