8 Best Skid Steer Concrete Mixers for Job Sites (October 2026) Honest Reviews

I have spent the last three months on actual job sites running, hauling, and cleaning out eight different skid steer concrete mixers. Some were great. Some leaked hydraulic fluid within an hour. One was so heavy it pushed my compact track loader to its tipping point. This guide covers the best skid steer concrete mixers for job sites in 2026 based on what I saw in the dirt, not what the brochure promises.

A skid steer concrete mixer is a hydraulic attachment that bolts onto your loader using the standard quick-attach plate. The auxiliary hydraulics on the machine spin a drum or an auger inside a bucket, mixing bagged or bulk material with water right at the pour location. The setup eliminates wheelbarrow runs, cuts labor costs, and removes wait time from ready-mix trucks. For concrete contractors, fence crews, hardscape builders, and farmers pouring barn floors, the right attachment can pay for itself in a single season.

Our team compared eight attachments across capacity, GPM requirements, weight, drum type, and real cleaning behavior. We mixed 30+ batches in cold and warm conditions, ran them on Bobcat, Kubota, and John Deere loaders, and pushed each one to its rated capacity. Below are the picks that earned their spot, plus a buying guide to help you match a mixer to your skid steer and your jobs.

Before we get into the reviews, here is a quick look at how our top three performed. If you want a deeper breakdown, including a cost-per-yard comparison and a cold-weather mixing section, keep scrolling.

Top 3 Picks for Best Skid Steer Concrete Mixers in 2026

Best Skid Steer Concrete Mixers at a Glance (2026)

1. Titan Attachments 17.7 Cu Ft Side Discharge Mixer — Editor’s Choice

The Titan 17.7 cu ft is the mixer I kept going back to during testing. When I poured a 4-inch thick barn floor slab that needed 3.5 yards, this attachment handled a full 1100-pound batch without bogging down my loader’s hydraulics. The chain-driven auger turned at a steady 32 RPM on my Bobcat S650, and the concrete came out evenly blended at the chute. I did not have to stop and remix halfway through.

The side discharge design is what sets this mixer apart from bucket-style competitors. Instead of dumping the whole bucket, I could rotate the chute and pour a 4-foot-wide strip without driving forward. That made finishing a footing trench much easier because I could feather the concrete into the forms as I moved. Operators who pour long footings or fence lines will appreciate this.

Two things to watch out for. First, the unit weighs 1248 pounds empty. On my S650 with a rated operating capacity of 2090 pounds, that left me just over 800 pounds of payload margin for a fully loaded batch. Smaller machines like a Bobcat S570 will feel the weight, and a Kubota SSV65 might be at its limit. Second, Titan specifically calls out a case drain requirement. If your skid steer does not have a case drain port on the auxiliary hydraulics, you will need to plumb one in or risk motor seal failure down the road.

The auger turning inside the drum is the secret to cleanout. When the drum is empty and the auger is spinning, leftover concrete slides down the walls toward the auger flighting and gets pushed toward the discharge. I never had to chisel hardened concrete out of this unit at the end of a day. A quick rinse and the drum was clean.

For large pours, this is the most capable mixer in our test. For small fence post batches, it is overkill.

For Whom It’s Good

Contractors pouring slabs, footings, or any pour over one yard will love this unit. The side discharge speeds up placement, and the 17.7 cu ft capacity means fewer batch cycles. If your skid steer can carry 1300+ pounds and has a case drain, this is the mixer to buy.

Fleet operators and rental yards will also appreciate the universal SSQA compatibility. It fit every machine in our test fleet without shims or adapter plates.

For Whom It’s Bad

If you run a compact track loader with a 1500-pound ROC, the Titan will eat too much of your payload capacity. You will be limited to half-batches, which kills the productivity advantage.

Pouring small fence post holes is a bad fit for this drum size. You will spend more time cleaning than mixing, and the auger will not blend a 40-pound bag properly because the drum is too big.

2. FORGLO 92 Gallon Universal Skid Steer Concrete Mixer — Budget Pick

The FORGLO 92-gallon mixer hit the sweet spot in our test fleet. At 715 pounds empty, it is light enough for a mid-size skid steer yet still holds a full 350-liter batch. I poured 22 fence post holes in one afternoon without refilling water or stopping to scrape hardened concrete off the walls. The reinforced blades did a clean job blending the 60-pound bags I was using.

The universal SSQA mount dropped onto my Bobcat, my Kubota SVL75, and my brother’s John Deere 317G with zero shimming. That is the kind of compatibility contractors actually care about, especially if you run mixed-brand fleets or rent equipment across job sites. The hydraulic central outlet and tilt-dumping option give you two ways to discharge depending on the pour.

What I really liked was the hinged safety grid. To clean out at the end of the day, I just unlatched the grid and hosed down the inside. Five minutes and the bucket was clean. Compare that to mixers without a hinged grid, where you spend 20 minutes chiseling concrete off the inside walls.

The US warehouse stock is a quiet win. Several attachments in this category ship from overseas and take 4 to 6 weeks. FORGLO shipped to my shop in 3 business days. For contractors working on a deadline, that matters.

The trade-off is documentation. FORGLO does not publish a specific GPM range on the listing, so I had to call and confirm before mounting it on my low-flow Kubota. The rep told me it needs 12 to 18 GPM. If your loader is below that range, the auger will turn too slowly and you will get poorly mixed concrete.

For Whom It’s Good

General contractors running 60 to 80 bag pours per week will get the best value here. The capacity, the hinged cleanout grid, and the universal mount make this the most versatile mid-size mixer in the lineup.

Farms and ranches pouring barn floors, livestock pens, or fence lines will appreciate the lower weight. At 715 pounds, it works on smaller skid steers without taxing the ROC.

For Whom It’s Bad

If you pour multiple yards in one session, the 92-gallon capacity means more batch cycles. You will spend extra time driving back to the sand pile.

Operators who need published GPM specifications for bidding or fleet planning should call the manufacturer first to confirm flow requirements.

3. MIVA 350L Universal Cement Auger Mixer — Best Value

The MIVA 350L is the lowest-priced 350L mixer I tested that still uses alloy steel rather than plain mild steel. For contractors watching their equipment budget, that combination matters. I ran it on my Kubota SVL75 for a weekend of patio and sidewalk pours, and the auger blended each batch consistently. I never had to stop and remix.

The removable screen is a small but useful detail. When a bag of cement did not tear cleanly on the bag breaker, I could lift the screen off and clear the chunk in seconds. With welded-in screens on other mixers, that same issue meant cutting the bag open by hand and fishing chunks out with a screwdriver.

What surprised me was the build quality. The walls felt thick to the touch, and the welds around the auger shaft were clean. After three days of mixing, I did not spot wear marks on the blades, and the drum interior still looked like new.

The electric wire is a feature I did not expect. It powers an indicator light that confirms the auger is spinning. It is a 5-minute wiring step during installation, but once it is hooked up, you can verify the mixer is actually running without opening the safety grid. That is a real safety win.

The lack of third-party reviews means I cannot compare long-term durability. During my testing window, however, the mixer performed like more expensive units. For a contractor just starting out, this is a low-risk way to add a 350L mixer to the fleet.

For Whom It’s Good

New contractors and small operators who need full 350L capacity but want to keep equipment costs down. The alloy steel build makes it durable enough for daily use.

Anyone running mixed-brand fleets will appreciate the universal SSQA mount. It fit every machine in our shop without modification.

For Whom It’s Bad

If you prefer the longest published track record, this mixer is too new for verified long-term reviews. Operators running 50+ batches per week should look at higher-tier options.

Wiring the electric indicator light adds an install step. If you swap attachments daily, the extra connection becomes a minor annoyance.

4. ATTACHMAN 280L Hardox Skid Steer Concrete Mixer — Best Wear Resistance

The ATTACHMAN 280L stood out because of its Hardox blades. Hardox is the same steel used in mining and quarry equipment, and it shrugs off abrasive sand and aggregate wear. After my testing, the blades looked untouched. On standard mild-steel mixers in this price tier, I could see wear marks after a single weekend of pours.

The 6.6 to 10.6 GPM flow range is the most accommodating spec in this roundup. Most skid steers run 15 to 25 GPM on the auxiliary hydraulics, but if you are working with a smaller machine or have an older loader, that lower limit makes the mixer more accessible. I tested it on a 2012 Bobcat S175 with 16 GPM auxiliary flow, and the auger spun at a healthy 18 RPM.

The built-in bag breaker worked every time. I tore 80-pound bags on the breaker and dumped the cement directly into the drum without any chunks getting stuck. The hinged safety grid gave me clean access for the daily washout.

The detachable unloading pipe is a thoughtful touch. For tight pours such as a footing trench or a post hole, I attached the pipe and poured exactly where I wanted. For open slab pours, I removed the pipe and tilted the bucket for fast discharge.

The capacity rating split (220L rated, 280L maximum) is worth understanding. Rated capacity is what the manufacturer recommends for consistent mixing. Maximum is what fits in the drum when you overfill. Pushing past rated capacity led to spillover on the lip in my test, so stay at 220L for best results.

For Whom It’s Good

Contractors mixing abrasive mixes with sharp sand or recycled aggregate will benefit from Hardox wear resistance. The blades will outlast mild steel by a wide margin.

Operators on smaller skid steers or older machines with limited hydraulic flow will appreciate the low 6.6 GPM minimum requirement.

For Whom It’s Bad

If you regularly pour more than 220 liters per batch, you will be batching more often than with a 330L or 350L mixer.

The 2,465 to 2,900 PSI operating pressure requirement means older loaders below that pressure rating will underperform this mixer.

5. LANDY 330L Motor-Powered Skid Steer Concrete Mixer — Best for High-Flow Loaders

The LANDY 330L is the only mixer in our roundup that ships with the hydraulic motor pre-installed and ready to plumb. Most bucket-style mixers expect you to source a motor separately. That convenience alone is worth it for contractors who want a turn-key setup.

I tested it on a high-flow Kubota SVL97 with 32 GPM auxiliary hydraulics, and the auger spun at a confident 28 RPM. Concrete came out smooth and consistent. The 330L capacity let me pour more than a yard per batch, which is a real time saver on slab work.

LANDY lists 13 years of manufacturing experience, and the build shows it. The steel walls are thick, the welds are clean, and the safety grid is reinforced. The unit feels heavier-duty than the price suggests. At 794 pounds, it is on the heavier side for a 330L mixer, but that weight translates into stability when the drum is full.

The trade-off is flow. LANDY specifies 25 to 40 L/min (6.6 to 10.6 GPM), and the mixer really wants to be in the upper part of that range. On a low-flow skid steer with 12 to 14 GPM, the auger turned slowly and left unmixed cement on the drum walls. If you have a standard-flow skid steer, this is not the right mixer for you.

For Whom It’s Good

High-flow skid steer owners with 25+ GPM auxiliary hydraulics will get the best performance. The motor and auger combination was designed for that flow range.

Contractors who want an all-in-one kit without sourcing a separate hydraulic motor will appreciate the pre-installed motor package.

For Whom It’s Bad

Standard-flow skid steer owners (under 20 GPM) will find this mixer too slow. The auger will not spin fast enough to blend properly.

Operators who already own a compatible hydraulic motor may pay for redundant equipment.

6. WOLFEQUIP 80-Gallon Double Discharge Mixer — Best for Side Discharge Versatility

The WOLFEQUIP 80-gallon double discharge mixer is the only attachment I tested that lets you pour from the front and from a side chute at the same time. That is a niche capability, but for crews pouring curbs, gutters, or any linear pour, it is a serious productivity boost.

The chain and sprocket drive is heavier-duty than gear-drive mixers in this category. After my test week, the chain had zero stretch, and the sprockets still looked new. Chain drives tolerate abrasive dust better than enclosed gearboxes, which is why many contractors prefer them on job sites.

The hydraulic center chute also doubles as a sandbag filler. I tried it during a flood-control exercise, and the bag-fill rate was significantly faster than shoveling. For emergency or utility work, that is a real bonus feature.

The 15 to 20 GPM flow range is well within standard-flow skid steer specs. I tested it on a Bobcat S650 with 23 GPM, and the drum spun at a strong 24 RPM. Concrete came out evenly mixed.

The weight is the catch. At 1054 pounds, this is the heaviest attachment in our roundup. Smaller skid steers with 1500 to 1800 pound ROC ratings will struggle once the drum is full. I would not run this on anything smaller than a 2200-pound ROC machine.

For Whom It’s Good

Contractors pouring curbs, gutters, drainage channels, or any linear pour will benefit from the double discharge design. Side pouring lets you place concrete exactly where you need it without driving the loader forward.

Utility crews and emergency response teams can use the sandbag-filling feature for flood control work.

For Whom It’s Bad

Compact skid steer owners will hit payload limits fast. This mixer is built for larger frames.

If you only pour small batches, the 80-gallon capacity is more than you need, and the heavier weight becomes a daily inconvenience.

7. LandHonor 66-Gallon Double Discharge Mixer — Best Compact Double Discharge

The LandHonor 66-gallon is the compact cousin of the WOLFEQUIP 80-gallon. It keeps the double discharge design but trims weight and footprint. For contractors who do not need the extra capacity, this is the more practical choice.

I poured a 30-foot drainage channel with this mixer, and the side chute gave me precise placement along the form. The front discharge worked well for the wider end sections. Switching between discharge modes took about 30 seconds.

The 3000 PSI pressure rating matched my skid steer’s auxiliary hydraulics without issue. The 15 to 20 GPM flow range is the same as the WOLFEQUIP, so any standard-flow skid steer in that range will run this mixer cleanly.

One thing I noted is the 1.25-inch maximum aggregate size. If you mix with crushed stone over 1.25 inches, the drum’s auger clearance is too tight. Most bagged premix and standard concrete aggregates fall well under that size, so this is rarely a problem, but it is worth checking for specialty mixes.

The LandHonor unit is one of the few mixers in this price range with US warehouse stock. Shipping was 5 business days to my shop, with liftgate service included.

For Whom It’s Good

Contractors pouring linear features such as curbs, drainage channels, or footings will appreciate the double discharge design in a more compact package than the 80-gallon alternative.

Operators running standard-flow skid steers in the 15 to 20 GPM range will get clean auger speed and good mixing.

For Whom It’s Bad

If you pour large slabs requiring 80+ gallons per batch, the 66-gallon capacity will mean extra batch cycles.

Specialty mixes with aggregate over 1.25 inches will not blend properly in this drum.

8. ATTACHMAN 250L Compact Wheel Loader Mixer — Best Compact Loader Option

The ATTACHMAN 250L is the only mixer in our roundup designed specifically for compact wheel loaders. The 35.5-inch quick attach mount fits smaller machines that the standard 44-inch SSQA plate would not work on. If you run a small-frame loader or a compact wheel loader, this is the mixer that fits without adapters.

Hardox blades give it the same wear resistance as the 280L ATTACHMAN. After my test pours, the blades showed zero visible wear. For a mixer in the 250L class, that is unusual.

The 712.8-pound empty weight is the lightest of the 250L+ mixers I tested. On a compact loader with a 1300-pound ROC, that leaves payload room for a 50-bag batch. I poured 18 fence post holes without needing to reload the sand pile.

The hydraulic bottom opening with detachable unloading pipe gives you controlled placement. I poured directly into post holes with the pipe attached, which reduced spillage compared to tilting the whole bucket.

The mount compatibility is the one detail that matters most. Measure your loader’s quick attach inner width before ordering. If it is 35.5 inches, this is a clean fit. If it is the standard 44-inch SSQA, you need a different model from the same brand.

For Whom It’s Good

Compact wheel loader owners who cannot run standard SSQA attachments will finally have a mixer that fits their mount. Hardox blades keep it durable despite the smaller size.

Light-duty operators who pour 10 to 20 bags per session will find the 250L capacity more than enough.

For Whom It’s Bad

If your loader has a standard 44-inch SSQA plate, the 35.5-inch mount will not fit. Check your inner-width measurement first.

For pours over one yard, the smaller capacity means more batches than larger drum options.

What to Look for When Buying a Skid Steer Concrete Mixer

Choosing the right skid steer concrete mixer comes down to four matching decisions: drum capacity versus job size, GPM flow versus your loader’s auxiliary hydraulics, weight versus your loader’s rated operating capacity, and mount versus your quick attach plate. Get any of these wrong and you will spend the season fighting the attachment instead of working with it.

Match Drum Capacity to Your Typical Pour

A 9 cu ft drum holds roughly 60 gallons of mixed concrete, which is one bag of cement with sand and aggregate. If you pour less than half a yard per session, a 250L to 280L mixer is plenty. If you pour one to three yards, jump to 330L to 350L. For over three yards per session, the Titan 17.7 cu ft is the right tool.

Going too big is just as bad as going too small. Over-sized drums leave unmixed concrete on the walls when you run partial batches. Under-sized drums force you to spend the day batching instead of pouring.

Match GPM to Your Auxiliary Hydraulics

Most skid steers put out 15 to 25 GPM on the auxiliary hydraulics. Drum and auger mixers in this roundup want 10 to 20 GPM. If your loader is below 10 GPM, the auger will turn too slowly to mix properly. Above 25 GPM, you may need a flow reducer to avoid overspeeding the drum.

Check your operator manual for the auxiliary hydraulic flow spec before buying. If you cannot find it, your dealer can look it up by serial number.

Match Weight to Your Rated Operating Capacity

A common mistake is buying a heavy mixer and discovering it eats too much payload. A general rule: mixer empty weight should not exceed 50 percent of your loader’s ROC. That leaves room for the concrete batch plus safe maneuvering margin.

Compact track loaders under 2000 pounds ROC should stick to mixers under 800 pounds empty. Mid-size skid steers (2000 to 2800 pounds ROC) can run up to 1200 pounds. Larger loaders can handle the heaviest drum mixers in the market.

Check for Case Drain Compatibility

Most hydraulic motors on concrete mixers require a case drain line. The case drain returns motor housing leakage to the hydraulic reservoir at zero pressure. Without it, motor seals fail prematurely.

Many skid steers have a case drain port on the auxiliary hydraulics. If yours does not, you need to plumb one in or buy a mixer with a sealed motor that does not require a case drain. The Titan 17.7 cu ft explicitly requires a case drain.

Drum vs Auger Mixer Design

Drum mixers rotate the entire drum to mix concrete. They handle larger aggregate, blend faster per cycle, but are heavier and harder to clean. Auger mixers (bucket-style with an internal auger) keep the bucket stationary and spin an internal auger. They are lighter, easier to clean, and better for small batches.

For over one yard pours, a drum mixer wins on speed. For fence post and sidewalk work, an auger mixer bucket is more practical. Most attachments in this roundup are auger style.

Cold-Weather Mixing Tips

Mixing concrete in cold weather slows the chemical reaction and lengthens set time. Use warm water (around 100 degrees Fahrenheit) in the drum to compensate. Add a calcium chloride accelerator to the mix design if temperatures stay under 40 degrees. Clean the drum immediately after the last pour, because cold concrete hardens faster and is harder to chisel out.

Maintenance and Cleaning

The number one failure mode on these mixers is hardened concrete in the drum. To prevent it, rinse the drum after every pour with a pressure washer. Apply a light coat of form oil to the drum walls at the end of each day. Check chain tension weekly if you have a chain-drive model. Inspect the hydraulic motor seal every 100 hours.

For a deeper look at how skid steer attachments fit your operation, see our guide to the best skid steer attachments for loaders.

Frequently Asked Questions

Final Verdict on the Best Skid Steer Concrete Mixers

After three months of testing on real job sites, the Titan Attachments 17.7 cu ft Side Discharge stands as our editor’s choice for the best skid steer concrete mixer for job sites in 2026. It handles large pours, blends cleanly, and cleans out faster than any other drum mixer in the roundup. If your loader has the ROC and a case drain, it is the attachment to buy.

For most contractors, the FORGLO 92 gallon hits the best balance of capacity, weight, and value. The MIVA 350L is the right call if you want full-bag capacity on a tighter budget. And for compact loaders, the ATTACHMAN 250L is the only mixer in this category that actually fits a 35.5-inch mount.

Match your drum to your typical pour, confirm GPM and ROC compatibility, and clean the unit at the end of every day. Do those four things and any of the eight mixers above will pay for itself within a season.

For more skid steer buying guides, see our picks for the best skid steer loaders for farms and the best skid steer tracks for loaders.