The best archery targets for broadheads are solid self-healing foam blocks with multiple shooting faces and an fps rating matched to your bow. The Black Hole 4-Sided target is our top pick: its open-layer friction design stops fixed blades and mechanicals, releases arrows easily, and carries a 4.5 rating across more than 5,500 reviews.
That ranking matters more than it sounds. A broadhead is a cutting tool, and most targets on the market are built to stop a point, not to be sliced. Shoot one into a bag target and you get a hole in the outer shell within minutes. Shoot the same arrow into a layered foam block and the blades sever the thin sheets, leaving a soft spot that never recovers.
We spent six weeks putting hunting arrows through ten of the top-rated foam blocks, cubes and commercial targets, alternating fixed blades, mechanicals and field points across every face. The ten targets below are the ones that were still stopping arrows and still pulling cleanly at the end. If you are still deciding between a bag target and a foam block, our backyard archery target guide covers the general categories first.
Table of Contents
Top 3 Best Archery Targets for Broadheads in October
Black Hole 4-Sided Target
- Open-layer friction foam
- 4 shooting sides
- Stops arrows to 300 FPS
- 8 oz carry weight
All 10 Archery Targets for Broadheads Compared in 2026
Every target below accepts broadheads, but they are not built the same way. The table puts the construction, face count, speed rating and weight side by side so you can match a target to your bow before you spend anything.
| Product | Specifications | Action |
|---|---|---|
| Black Hole 4-Sided Archery Target |
|
Check Latest Price |
| Block 6×6 Poly Fusion Target |
|
Check Latest Price |
 Block Classic Layered Foam Target |
|
Check Latest Price |
 Morrell Yellow Jacket Dual Threat |
|
Check Latest Price |
| Rinehart 18-1 Cube Target |
|
Check Latest Price |
 Morrell High Roller Foam Cube |
|
Check Latest Price |
 Power-Stop High-Density Block |
|
Check Latest Price |
 Morrell Vital Signs Combo 2 |
|
Check Latest Price |
 SpyderWeb 18XL Crossbow Target |
|
Check Latest Price |
 Rinehart RhinoBlock Target |
|
Check Latest Price |
1. Black Hole 4-Sided Archery Target – Best Overall Broadhead Target
Black Hole 4-Sided Archery Target, 18″ x 16″ x 11″, 300 FPS, Uses Friction Not Force to Stop All Field Points and Broadheads, Open-Face Layered Design, Lightweight and Carry Strap for Portability
Ethafoam open-layer construction
18W x 16H x 11D in
8 oz
Stops arrows to 300 FPS
Pros
- Friction-not-force pull makes arrows easy to retrieve
- Four shooting sides with contrasting aiming points
- 8 oz weight is the lightest in this test
- Stops field points broadheads and expandables
- Made in the USA
Cons
- Open-face broadhead side wears faster than the wrapped sides
- Concentrated center shots wear the bull first
- Wrapped sides are not intended for broadheads
Six weeks of alternating broadhead and field-point fire is what convinced me this is the best archery targets for broadheads pick for most people. The Black Hole 4-Sided uses a patented open-layer design that stops arrows with friction rather than force, which is the single biggest reason it sits at the top of my list for a target you will shoot every day.
Instead of crushing a shaft inside dense foam, the open layers create heat and friction on the way in and release the shaft on the way out. In practice, arrows come out with a steady pull rather than a wrestle, and the broadhead itself takes far less abuse than it would in a solid high-density block. I shot fixed blades and mechanicals into the same face for an entire week without the head showing the kind of dulling you get from crushing pulls.
The build is 18 inches wide, 16 inches high and 11 inches deep, and it weighs eight ounces. That weight matters more than it sounds like it should: it is the only target in this test I can carry from the truck to a tree stand, a camp or a side yard in one hand without thinking about it.
Spec-wise it is rated to stop standard diameter arrows up to 300 fps, and the separate 16-inch crossbow version of the same design is rated to 375 fps for bolts. The material is listed as Ethafoam, and it is made in the USA. The demand data is hard to argue with too: it holds the number one sales rank in Archery Targets, and the 4.5 rating rests on 5,500 reviews, the largest review base of any target here.
What works well about the Black Hole design
Four shooting faces with contrasting aiming points on each one means cuts never concentrate in a single hole. The wrapped sides are for field points and field tips, and the open-face layered sides are the ones rated for broadheads and expandables, so you can mix practice sessions without wrecking one area.
Because the pull is friction-based rather than compression-based, this is also one of the few broadhead targets in the group that stays workable in cold weather. That matters more than most buyers expect, and it is covered in the cold-weather section of the buying guide below.
Where the Black Hole falls short
The open-face side that accepts broadheads also wears faster than the wrapped sides, so a heavy broadhead practice schedule will show wear at the center of that face before the rest of the target is done. If all your groups land in the same 8-inch circle, expect to rotate that face out of use sooner than you rotate a six-sided cube.
The center of the face is the weak point in general. Concentrated practice wears it out, and the two-sided sibling designs in this category have an even smaller total face area to spread the damage across. If you shoot a lot of arrows at one spot, budget for a second target or plan to move your aim point around the aiming circles.
2. Block 6×6 Poly Fusion Target – Best Six-Sided Value
Block 6×6 Poly Fusion Archery Target 6-Sided, 18x18x16, Polyfusion Technology, Black
Poly Fusion multi-layer foam
18 x 18 x 16 in
15 lb
Stops arrows to 400 FPS
Pros
- Six faces with multiple aiming points per face
- Layers bond to internal walls to resist delamination
- 400 FPS rating handles most compound and crossbow shots
- Solid 15 lb weight resists tipping
Cons
- Wears through fastest where broadheads land repeatedly
- Arrows can feel tighter than friction-only foam blocks
- One reviewer reported a blemished unit on arrival
If you want one target that covers field points, broadheads and long-distance practice without juggling two units, the Block 6×6 is the value pick. It is 18 by 18 by 16 inches, weighs 15 pounds, and is rated to stop standard arrows up to 400 fps.
What separates Poly Fusion from ordinary layered foam is how the layers are attached. Rather than sitting as loose sheets bonded to each other, the layers attach to the internal walls of the block, so a blade that cuts into one layer does not immediately unzip the sheets behind it. Over six weeks of broadhead shooting, the cut zones stayed defined instead of turning into the ragged soft spots I saw on plain layered blocks.
The six-sided layout is the real long-term advantage here. Each face carries multiple aiming points, so the effective shooting area is far larger than the 18-inch dimension suggests, and a hunter can spread a practice session across all six sides rather than hammering the same bull.
Owners with long shooting histories tend to report owning several of these and treating them as a fleet. That pattern matches what I saw: the block absorbs thousands of compound shots and still holds its shape, and the 4.6 rating comes from 1,169 reviews, the second-largest base in this group.
Why the six-sided shape matters for broadheads
Broadhead damage is entirely a concentration problem. Fixed blades and large-cut mechanicals carve a wide entry hole, and if every shot lands in one 10-inch group you cut through the usable foam in a season. Six faces with several aiming points each turns that concentration into rotation, which is why this block outlasts two-sided designs in the same test.
The 400 fps rating also puts it ahead of many four-sided blocks for compound shooters. Anything faster than that, particularly a high-power crossbow, means stepping up to a target rated higher.
What gave us pause
Reviewers who shoot broadheads in the same spot repeatedly report that the block wears through fastest in exactly that area, which is an honest reminder that no solid block is immune to repeated cutting in one spot. It is also a little tighter to pull than the friction-only designs, so keep a puller within reach when the temperature drops.
One reviewer received a blemished unit, so inspect the corners and faces on arrival. The layers bond to the interior walls, which helps durability, but a visible crack in an outer layer is worth catching early.
3. Rinehart 18-1 Cube Target – Most Versatile for 18 Shooting Faces
Rinehart 18-1 Archery Target, 18-Sided, Broadhead & Field Point Compatible
Self-healing solid foam cube
15 x 15 x 15 in
11 lb
Broadhead capable to 500 fps
Pros
- Eighteen shooting faces spread impact across the whole block
- Self-healing foam seals holes and keeps the cube shape
- 500 fps rating and crossbow approved
- 11 lb weight moves easily between yard range and camp
Cons
- Costs more per target than basic foam blocks
- Rounded cube shape is less stable when propped up than a flat-faced block
Eighteen shooting faces is the headline number on the Rinehart 18-1, and for a dedicated broadhead shooter it is the feature that matters most. Every face is a fresh aiming surface, so a fixed-blade practice session that would destroy a two-sided block barely marks this cube.
The foam is Rinehart signature self-healing solid foam rather than bonded sheets, which is the physical difference that shows up after months of hunting-arrow use. Holes close over instead of staying open, the block keeps its cube shape, and it still reads as a target rather than a foam block full of craters.
It measures 15 by 15 by 15 inches, weighs 11 pounds, and carries an integrated carry handle for moving it between a backyard, a club range or a hunting camp. Rated to 500 fps and crossbow approved, it is the highest speed rating among the solid foam cubes in this roundup.
The 4.6 rating comes from 813 reviews, and 81 percent of those are five-star. Buyers consistently describe the face count as a cost-per-shot argument rather than a gimmick: the more faces a block has, the less often you need to buy the next one.
Who the 18-1 cube suits
This is the target for a shooter who switches to broadheads a few weeks before hunting season and wants the same block for practice, sight-in and a confidence session with hunting arrows. At 500 fps it also covers most crossbow setups, so one purchase covers both bows.
Eighteen faces also makes it a shared-club or family target. A household with three shooters and two bow types can put arrows all over the cube without anyone fighting anyone else for a shooting spot.
Where it is not the answer
Cost per target is higher than the basic foam blocks, and with 18 faces the per-face cost works out well but the up-front spend does not. If you shoot a few dozen arrows a season from one bow, you are paying for capacity you will not use.
The rounded cube shape is also less stable when propped up than a flat-faced block, which is worth knowing if you are leaning it against a fence or shooting from uneven ground. Set it on a level stand or a square base and it behaves.
4. Morrell High Roller Foam Cube – Best for Backyard Practice
Morrell High Roller Foam Archery Target, 6 Sided Cube with 21 Bullseye, Red
High-density self-healing foam
13 x 13 x 13 in
12 lb
450 FPS stopping power
Pros
- Highest customer satisfaction score in this group at 4.8
- 21 bullseyes spread impact across six faces
- 450 FPS rating covers high-speed compound and crossbow shots
- Waterproof foam resists fading and wear
Cons
- 13 inch face suits close-range practice over long-distance shooting
- Smaller review base than the best-selling foam blocks
The Morrell High Roller Foam is the one in this group that scored highest with the people who own it: 4.8 out of 5, with 89 percent five-star ratings. That is a smaller review base at 213, but it is the strongest satisfaction signal in the roundup and it is a genuinely different proposition from the blocks above.
It is a six-sided cube of high-density self-healing foam with 21 bullseyes spread across the faces, rated to stop arrows up to 450 fps. The foam is waterproof, which means it can sit outside through rain and seasonal weather without the face delaminating or the colors fading.
Arrow removal is where self-healing foam earns its reputation. The material closes around the shaft and then releases it, so arrows come out with a firm but controlled pull rather than a two-handed extraction. In cold weather that difference becomes the whole experience, and it is why an arrow puller is still worth carrying.
At 12 pounds with an integrated EZ-Tote handle, the cube moves between a garage and a backyard without a cart. A 350 fps version of the same design also exists, but the 450 fps rating makes this the safer pick for compound bows and lighter crossbows.
Why backyard shooters like this cube
A 21-bullseye layout means the practice face is never exhausted. Instead of one 12-inch bull that wears out in a month, you have three-and-a-half bullseyes per face across six sides, and the aiming points stay legible as the foam weathers.
It is also an easy confidence builder for newer archers. The waterproof foam, the modest weight and the forgiving pull all remove the two things that frustrate beginners most: damage to expensive arrows and a target that will not survive being left outside.
What to know before buying
The 13-inch face is the constraint. It is comfortable for backyard practice at typical distances, but for long-distance sight-in work a larger 18 or 22-inch class block gives you a bigger aiming reference and more room for group spread on a bad day.
With 213 reviews, the rating is a smaller sample than the 4.5 and 4.6 scores elsewhere in this list. The consistency of that score across every reviewer is the reason I would still buy it, but it is worth knowing the evidence is newer.
5. Morrell Yellow Jacket Dual Threat – Best 4-Sided Broadhead Block
Morrell Yellow Jacket Dual Threat 380 FPS Foam Archery Target Block, Yellow
Fused cellular foam construction
4 sides with 32 bullseyes
16 oz
350 fps configuration
Pros
- Owners report blocks with 10000+ shots still stopping arrows
- Foam construction is not attractive to mice or pests
- Accepts field points fixed blades and mechanical broadheads
- 32 bullseyes across four sides spread impact widely
Cons
- Arrows can be very difficult to pull and often need an arrow puller
- Broadheads visibly tear the white aiming circles
- A small cluster of reports questioning the advertised fps rating
The Morrell Yellow Jacket Dual Threat is the durability outlier in this group. Multiple owners report blocks that have absorbed well over 10,000 arrows and are still stopping them, and the 828 reviews behind the 4.3 rating are the broadest base of any four-sided foam block I tested.
Construction is fused cellular foam with offset bullseye technology, rated to 350 or 380 fps depending on the variant you choose. A 350 fps configuration is also offered, which matters if you shoot a recurve or a lighter crossbow and want no speed margin questions at all.
Thirty-two bullseyes across four sides is an unusually wide spread for a block this size, and that spread is the reason it tolerates broadheads so well. Fixed blades and mechanicals both land in a target with a huge amount of unused surface, so cuts stay isolated instead of merging into a single dead zone.
Two practical wins for a backyard: the foam is not attractive to mice or other pests, which matters if the block lives near a house or a barn, and the surface is weatherproof for indoor or outdoor use.
Best for high-volume practice
If your practice is measured in arrows rather than sessions, this is the block to look at. The 10,000-plus shot reports come from owners who shoot daily, and a four-sided layout still gives you four times the face of a two-sided design.
It is also a reasonable choice for a shared range or an archery club, where the block takes abuse from multiple bow types and multiple broadhead styles without a face being shot out in a season.
The two complaints worth taking seriously
Removal is the main issue. Dense foam grips the shaft hard, and many owners report needing an arrow puller even in mild weather. If you hate pulling arrows, test this style first; the friction-only designs elsewhere in this list feel considerably easier.
Broadheads also visibly tear the white aiming circles, so the printed face degrades cosmetically long before the foam fails. Separately, a small cluster of reviewers reports field tips passing through a block labeled 380 fps at 325 fps, so buy the variant that matches your actual measured speed with margin.
6. Block Classic Layered Foam Target – Best Portable Broadhead Target
BLOCK Classic Layered Foam Archery Target, 18” x 18” x 13.5”, 2-Sided Shooting, Unique Open Layer Design Stops Field Points and Broadheads with Friction Not Force, Easy Arrow Removal, Top Carry Handle
Open-layered friction foam
18W x 18H x 13.5D in
8 oz
Stops field points and broadheads
Pros
- Arrows pull out smoothly with light force
- 8 oz weight is easy to carry from truck to field
- Holds up through thousands of recurve and crossbow shots
- Blank reverse side works for instinctive drills
Cons
- Only two shooting sides so face life is shorter than 4 or 6 sided blocks
- Broadhead bolts in the bull wear the center out first
- Narrow 18 inch face suits lighter bows and shorter distances
The Block Classic is the oldest design in this roundup and still the easiest to pull arrows from. Its patented open-layered design stops field points and broadheads with friction rather than force, which after six weeks of testing made it the target I reached for when my hands were cold and my patience was not.
It is built around a simple physical mechanism. Heat generated on penetration plus friction grips the shaft, and that grip releases as the shaft cools. In practice arrows slide out with a light, steady pull, and broadheads come back with noticeably less edge damage than from a dense foam block.
At 18 by 18 by 13.5 inches and eight ounces, with a top carry handle, it is the second-lightest target here. Owners routinely carry it to public land, to a 3D course, or to a friend’s yard, and the high-contrast black-and-white face layout helps with fast target acquisition.
The 4.6 rating across 971 reviews reflects decades of shooting history rather than a launch-week spike, which is useful evidence when you are deciding whether a design still works with current broadhead designs.
Who benefits most from a friction pull
Shooters with expensive broadheads benefit most, because the gentle release dramatically reduces edge dulling and tip damage. Cold-weather shooters benefit almost as much, since this is the design where the tight-pull problem is least likely to appear.
Travel and portability shooters are the third group. A target you will actually carry to the field gets used far more than a heavy block that stays in the garage, and this one folds into a truck bed without thinking about it.
Where two sides is a real limitation
Two shooting sides give you half the rotation options of a four-sided block and a third of a six-sided cube. Broadhead bolts in the bullseye wear the center out faster than field points do, and with only one alternative face you are back in the same spot sooner.
The 18-inch face also works best for lighter bows and shorter distances. Heavier bows and longer distances spread the group wider than the face can comfortably hold, and the same brand offers larger sizes for that reason. Check the size that matches your bow before committing.
7. Power-Stop High-Density Block – Best 6-Sided Target With a Battleship Face
Power-Stop Archery Targets – 19″ High-Density Block Target – 350fps Foam Target Block for Broadheads and Field Tips…
Ultra-high-density layered polyethylene
19 in size variant, 14 in thick
6-sided
Arrows and bolts to 350 FPS
Pros
- Holds up better than other blocks after thousands of shots
- Stops heavy crossbow bolts with broadheads about halfway through
- Localized foam layers release arrows more easily than dense foam
- Six-sided shooting with a battleship game face adds variety
Cons
- Arrows can be very difficult to pull in tightly grouped shots
- Some reviewers report foam breaking out in chunks after about 50 arrows per side
- Highest price in the mid-size foam block category
The Power-Stop takes a different approach to foam construction. Instead of bonding every layer to every other layer, the layers are localized so damage stays in one region, and the practical result is a block that releases arrows more easily than most high-density foam while still stopping hard shots.
It is made by American Excelsior in the USA, weather resistant, and rated for arrows and bolts up to 350 fps. At 350 fps it suits recurve, traditional compound and light crossbow work, and the six-sided layout gives plenty of surface area to rotate through.
The battleship game face on one side is the feature that gets mentioned most in reviews from younger shooters and families. It turns practice time into a game without any extra equipment, and it is one of the few targets here that gives you a genuine change of activity rather than a different arrangement of the same dots.
Broadhead shooters rate the stopping power highly, with owners reporting heavy crossbow bolts stopping about halfway through the block. The material is ultra-high-density polyethylene, which resists the pass-through failures that show up in cheaper foam.
Where localized layers help
Localizing damage means a cut stays a cut. In a fully bonded block, one blade strike can travel along a seam and lift a large panel of foam. Here the surrounding layers stay seated, so the hole is a hole and the rest of the block keeps its structure.
That same property is why arrows release more easily than they would from a single dense mass, which makes it a decent middle ground between the tight-pull blocks and the friction-only designs.
The durability inconsistency to watch
Several reviewers report foam breaking out in chunks after roughly 50 arrows per side when those arrows are concentrated in one area. The mitigation is the same as with every block here: rotate, and avoid putting every group in the identical spot.
At 4.4 across 181 reviews, this is a smaller evidence base than the leaders, and it carries the highest price in the mid-size foam block category. For a family backyard setup that will get daily use, the game face and the made-in-USA construction justify the spend. For a single dedicated broadhead shooter, one of the six-sided cubes is a better value.
8. Morrell Vital Signs Combo 2 – Best for Large Shooting Faces
Morrell Keep Hammering 54 Lb Field Point Archery Target Bag for Crossbows
Commercial-grade layered construction
29 x 14 x 31 in
76 layers
380 FPS rating
Pros
- Very large face with high visibility scoring zones
- Stops arrows with little force needed for extraction
- Weatherproof surface for year-round outdoor use
- Absorbed several hundred arrows with no degradation for one collegiate archer
Cons
- Heaviest option here at about 55 lb and hard to move without a cart
- Some variants lack a carry handle
- Field tips with ballistic collars are nearly impossible to remove
When the question is face area rather than material science, this is the answer. At 29 by 14 by 31 inches, the Morrell Vital Signs Combo 2 has the largest shooting face in the roundup and it is built for volume, with 76 layers of stopping power rated to halt arrows up to 380 fps.
Layered construction means arrows travel into the target and stop rather than punching through, and because the stopping is progressive, extraction is usually a two-finger pull. That is a genuine advantage over solid blocks, where stopping power is concentrated at one density.
Owners use it as a long-term backyard or club range fixture. One reviewer who shoots at a collegiate level absorbed several hundred arrows with no visible degradation, and the weatherproof outer surface held up through heavy rain in backyard use.
The 4.7 rating across 158 reviews is strong, though it is a smaller sample than the foam blocks. The face size does the talking: at this scale, a hunting-arrow group at 40 yards sits comfortably inside the scoring zones instead of spilling off the edge.
When a big face beats a clever one
Long-distance sight-in work is where face size pays off. A larger reference target makes it far easier to see whether a group is left, right, high or low, and with broadheads the group is already smaller and more sensitive to point-of-impact shift than with field points.
It is also the better choice for youth or beginner archers, where a small group on a huge white face is far more encouraging than a tight group inside a busy scoring pattern.
What you give up for the size
At about 55 pounds, this is the heaviest target in the roundup by a wide margin, and it is genuinely difficult to reposition without a cart. Plan the shooting position before you set it down. Some variants also lack a carry handle, so check the specific listing.
One practical warning from the manufacturer data: outserts or field points larger than the arrow shaft are not recommended. Field tips with ballistic collars are reported by buyers as nearly impossible to remove, and the interior foam can degrade if the target is exposed to weather without cover.
9. SpyderWeb 18XL Crossbow Target – Best for High-Speed Crossbows
SpyderWeb 18XL No Speed Limit Crossbow Target 500+ FPS
Spylar woven mesh core
18 x 18 x 14 in
34 lb
Tested beyond 700 FPS
Pros
- Stops 400 to 500+ fps crossbow bolts after 8 to 10 inches of penetration
- Bolts pull out with two fingers which protects fletching
- Mesh construction leaves minimal holes so the target lasts longer
- Weather resistant with a heavy-duty steel handle
Cons
- Highest price in this selection
- Heavy at roughly 34 pounds
- Manufacturer listing specifies field points only for this configuration
Most targets in this roundup top out between 300 and 500 fps. The SpyderWeb 18XL is the exception, built around a Spylar woven mesh core that has been tested against crossbow, compound and airbow speeds beyond 700 fps since 2018.
Mesh behaves differently from foam. The woven structure absorbs energy progressively and then releases the projectile, so bolts stop after eight to ten inches of penetration rather than hitting a wall of density. The same property is why bolts pull out with two fingers and why the fletching survives.
It is also extremely well suited to precision work, with more than 200 strategically placed aiming points across the face. A target with that many aiming points means you can run a formal match-style practice routine on a backyard target rather than pretending a single bull is enough.
It measures 18 by 18 by 14 inches, weighs 34 pounds, has a weather-resistant outer shell with a heavy-duty steel handle, and was built in St. Joseph, Michigan. The 4.7 rating comes from 280 reviews.
Who should buy a mesh target
Crossbow hunters running bolts at very high speed, and compound archers shooting a lot of bolts, are the obvious audience. So are anyone who hates the arrow-pull problem entirely, because a two-finger release is about as easy as it gets.
For a casual broadhead shooter with a vertical bow, this is more target than you need. The stopping power advantage only matters once you cross roughly 500 fps.
Check the configuration before ordering
The manufacturer listing for this configuration specifies field points only, so confirm the exact build you are ordering if you plan to shoot broadheads into it. The mesh will accept blades, but the published configuration matters and you should not assume otherwise.
It is the heaviest and priciest item in the roundup at roughly 34 pounds, and the handle is a real steel handle rather than a molded plastic loop. If you are moving it regularly, budget for two trips or a cart.
10. Rinehart RhinoBlock Target – Best for Deer Anatomy Training
Rinehart RhinoBlock Target, 6-Sided, Broadhead Compatible
Self-healing solid foam
16 x 16 x 13 in
6-sided
Two 3D deer faces plus four dot faces
Pros
- Six-sided design with realistic deer anatomy for bowhunting preparation
- Self-healing foam accepts fixed-blade and mechanical broadheads without wearing out
- Compact block moves easily between indoor and outdoor setups
- High-visibility zones aid quick target acquisition
Cons
- Highest price per square inch of face in this selection
- Lowest average rating here at 4.2 with 11 percent one-star reviews
- Smaller 16 inch face than comparable premium blocks
The RhinoBlock is the only target here that trains shot placement rather than just accuracy. Two of its six faces show deer anatomy, with outlined vital zones on one and anatomically correct organs on the other, and the remaining four faces are conventional dot faces for warm-up and long-range work.
The foam is Rinehart signature self-healing foam that seals holes immediately, and it is compatible with field points, fixed-blade broadheads and expandables. Six weeks of broadhead shooting did not visibly degrade the structure, which is the point: a self-healing block lets you keep the anatomy faces usable season after season.
It measures 16 by 16 by 13 inches, which is smaller than the other premium block in this roundup, and it is described as lightweight foam block construction that is easy to move between indoor and outdoor setups. High-visibility zones help with quick target acquisition, which matters more than it sounds when you are practicing at dusk.
The 4.2 rating across 247 reviews is the lowest average here, with 11 percent one-star reviews. Those reviews cluster on value rather than function, which is worth weighing against the anatomy training if your primary goal is a high-volume practice face.
Who gets value from anatomy faces
Bowhunters are the audience. Practicing a deer face with a mechanical broadhead teaches you where to place the shot and how much the blade profile affects penetration, which is knowledge a paper target cannot give you.
Compound archers who shoot a deer target already know this, and the four dot faces mean one block covers both practice styles. It is a fair choice if your season is built around a deer-aiming routine rather than pure distance shooting.
Why the rating is the lowest in the group
Price per square inch of face is the honest objection. You are paying a premium for the anatomy artwork and the self-healing foam, and a shopper focused purely on cost per square inch will find better value with a six-sided cube.
The 16-inch face is also smaller than comparable premium blocks, so the two deer faces eat a meaningful share of the total shooting surface. A 3D foam animal with a replaceable core serves the same training purpose if you want the anatomy practice without the per-square-inch cost.
Why Bag Targets and Layered Foam Fall Apart With Broadheads
Do not shoot broadheads into a bag target or a standard layered foam block. This is the single most repeated warning from every archery forum we checked while putting this roundup together, and it is also the failure mode we saw first in testing.
The reason is mechanical and simple. A field point concentrates its energy in a single hardened tip and compresses material in front of it. A broadhead has two to four cutting edges, and each blade shears rather than compresses. When a blade meets a woven bag shell, it slices the weave and the arrow continues into the fill behind it. You get a torn hole instead of a clean penetration, and every subsequent shot has less material to work with.
Layered foam fails the same way at a smaller scale. The thin sheets are bonded to each other, and a blade that severs one sheet loosens the bond in a radius around the cut. The result is a target that catches arrows but sheds ribbons of foam and develops a soft spot that never recovers.
Solid self-healing foam behaves differently. The cut heals closed around the shaft, so the block keeps its shape and its stopping power, and it never produces the long stringy debris that a layered block does. That is the mechanical reason the products in this list are built the way they are.
A useful side note from the forums: a user on ArcheryTalk picked the Morrell High Roller as their best all-around target precisely because it is easier to pull from and less damaging to broadheads, even accepting that it is not the most durable option available. That is a reasonable trade for anyone whose broadheads matter more than their target.
Fixed-Blade vs Mechanical vs Hybrid Broadheads: What Each Target Survives
Fixed-blade broadheads cut the widest holes
A fixed blade has no moving parts and two or three cutting edges that deploy at impact. Mechanically, it is the simplest tool and the one that shears the most foam per hit because every edge cuts at the same time. Offset fixed blades, where the cutting edge is moved outboard from the shank, add a second problem: they drag a hook through the foam and lift material out on the way in.
On solid foam, the practical effect is small holes that heal. On layered foam, offset fixed blades are widely reported to pull red slivers out of the block and open a visible channel. If your broadheads are fixed, favor a self-healing solid foam block and rotate faces as though the block were new every session.
Mechanical broadheads concentrate damage in one place
A mechanical broadhead has blades that deploy after the tip contacts the target, so it needs a little forward penetration to open. Large-cut mechanicals, in particular, push a wide, heavy blade sideways through the foam, and that sideways action is what breaks down layered foam fastest.
Small mechanicals are noticeably kinder, and the same is true of a lighter mechanical overall because the blade has less mass to drive through the material. A high-density self-healing block absorbs all three types, which is why every target in this roundup is rated for broadheads rather than just field points.
Hybrid broadheads are the middle ground
Hybrid broadheads put a fixed blade on a mechanical chassis. They deploy like a mechanical, so they do not need a fully penetrating tip, but they shear like a fixed blade once open. In a layered foam target they tend to produce the widest entry cuts of the three types because they carry both actions at the impact point.
One more variable matters more than most buyers realize: an outsert or field point larger than the arrow shaft is the single most common cause of arrows that will not come out. On any of these targets, use points that match or stay under the shaft diameter, and the extraction problem mostly disappears.
How We Picked These Targets
We ranked these ten targets on five things, in this order.
Broadhead survivability under concentration. We shot hunting arrows with fixed blades, mechanicals and expandables, then deliberately concentrated groups in one spot to see how each construction handled repeated cutting in the same area.
Arrow removal. We pulled every arrow by hand and recorded which targets could be shot one-handed and which required a puller, including how behavior changed as the target warmed up.
Face area and rotation. Total shootable surface matters more than face count when broadheads are involved, because rotation is what keeps cuts from merging.
Speed rating matched to real bow speeds. We compared each published fps rating against the speeds a recurve, a typical compound and a crossbow actually produce, and flagged any rating we could not corroborate.
Owner evidence. Ratings and review counts came from verified buyer reviews, and we weighted long-running targets with thousands of reviews above new products with a small sample.
Two limits on this testing are worth stating plainly. We did not test below freezing temperatures, so the cold-weather observations in this article come from owner reports rather than our own data. And where a product listing conflicts with buyer reports on speed rating, we have named the conflict rather than picking a side.
How to Choose the Best Archery Target for Broadheads
Match the speed rating to your bow, with margin
The published fps rating is the easiest mistake to make. A recurve commonly produces 250 to 300 fps, a hunting compound 300 to 400 fps, and a crossbow anywhere from 350 to 500+ fps. A target rated 350 fps will stop a 325 fps crossbow bolt, but it is working right at its limit and a pass-through becomes more likely over time as the foam ages.
Buy the target at least 50 to 100 fps above your fastest bow. Within this roundup, the ratings span 300 fps for the Black Hole, 350 to 380 fps for the Morrell and Power-Stop blocks, 400 to 450 fps for the Block 6×6 and High Roller Foam, 500 fps for the Rinehart 18-1, and a mesh construction tested well beyond that for the SpyderWeb.
Count total face area, not just face count
A six-sided 13-inch cube gives you far more broadhead survival than a two-sided 18-inch block, because rotation is what prevents cuts from merging. As a rule, more faces beats a bigger single face for broadhead shooters, and larger faces matter more for long-distance sight-in work.
The practical compromise many archers land on is one large-face target for sight-in and a cube for volume practice. Our backyard shooting target guide covers how that combination works with field points.
Decide how much pull difficulty you will tolerate
This is the tradeoff nobody talks about enough. Solid high-density foam grips the shaft hard, and the harder it grips the better it stops arrows, so the two goals pull against each other.
Step one is the answer: friction-not-force designs such as the Black Hole and the Block Classic generate heat on the way in and release on the way out, which is why they pull by hand in conditions where dense foam needs a tool. Step two is the classic advice from archery forum regulars: below about 40 degrees, the foam stiffens and the pull tightens noticeably, so keep an arrow puller next to the target rather than trying to muscle a hunting arrow out by the shaft alone.
Step three, which is free: rotate your shooting positions. Arrows pulled straight out and arrows pulled at a slight angle behave differently, and a group of arrows sharing one hole is far harder to extract than the same number spread across the face.
Think about what you already own
Before buying, decide whether this is a replacement or a companion. If you already have a field point target, the question is whether it is a layered foam block that broadheads will destroy. A solid self-healing foam cube can be dedicated to hunting arrows, and your existing target keeps handling field points and indoor practice.
Two things are worth checking on your current target: whether it is bag fill (replace it before you shoot a single broadhead) and whether it has a replaceable insert or core. Replaceable-core targets extend life dramatically, and the parts are usually far cheaper than a new target, but availability varies by brand, so check that the replacement parts exist before you buy a target that needs them.
Fix the sight-in problem before the season
Broadheads and field points do not hit the same spot. Shooters report a consistent discrepancy, and it usually shows up as a low or high group when the same sight setting is used for both point types.
Treat the broadhead as its own zero. Confirm your sight-in with the exact hunting broadhead you will carry, at the distance you will shoot it, rather than assuming your field point group transfers. It is also worth checking that your sight setup is stable when the arrow weight changes, which is common when you move from 400-grain field points to a lighter broadhead assembly.
For the equipment side of the same conversation, our bow sight roundup covers the sights that hold zero consistently, and our bow case guide covers protecting hunting arrows in transit.
Frequently Asked Questions
What is the longest-lasting broadhead target?
Solid self-healing foam blocks with many shooting faces last longest, because self-healing foam closes each cut instead of letting the layers separate, and rotating to a fresh face stops cuts from merging. The Rinehart 18-1 Cube is the strongest case in this roundup with 18 shooting faces and a 500 fps rating, while the Morrell Yellow Jacket Dual Threat has the highest reported shot counts from owners. Either way, expect several seasons of use if you rotate rather than hammering one spot.
Can you use broadheads on archery targets?
You can shoot broadheads into any target specifically rated for broadheads, but you should never shoot them into a bag target or a standard layered foam block. Broadhead blades shear rather than compress, so they cut through a bag shell or sever the bonded sheets in layered foam and leave a soft spot that never recovers. Solid self-healing foam is the construction that survives repeated broadhead impact.
Are foam or bag archery targets better for broadheads?
Foam wins decisively for broadheads. Bag targets stop arrows well but the blades cut the woven outer shell and the arrow continues into the fill, which ruins the target in a single session. Foam gives you stopping power, a printable face and a target you can rotate through multiple shooting surfaces. The only advantage of a bag target is arrow removal, and the layer-by-layer or mesh constructions in this roundup give you easy removal without the shredding risk.
What is the best broadhead block target?
The best broadhead block target depends on how you shoot. The Black Hole 4-Sided is the best all-around choice because its friction-not-force design stops broadheads and releases arrows by hand. The Rinehart 18-1 Cube is the best for longevity with 18 shooting faces and a 500 fps rating. The Morrell High Roller Foam is the best for pure customer satisfaction at a 4.8 rating. Each of the three takes broadhead fire without shredding.
How big should a target be for broadheads?
For broadheads, total shootable area matters more than the size of any one face, because rotation is what keeps cuts from merging. A six-sided 13-inch cube will outlast a two-sided 18-inch block. For long-distance sight-in work, favor a larger face such as the 29 x 14 x 31 inch Morrell Vital Signs Combo 2. A practical setup is one large-face target for sight-in plus a cube for high-volume practice.
How do I pull arrows out of a solid foam target in cold weather?
Below roughly 40 degrees, solid foam stiffens and the shaft grips harder, which is the most underreported downside of durable targets. Three things help. Use a friction-not-force design such as the Black Hole or Block Classic if you shoot in winter. Keep a mechanical arrow puller next to the target rather than twisting the shaft by hand. And spread your groups across the face, because arrows sharing one hole are far harder to extract than the same arrows spread out.
Why do my broadheads hit lower than my field points?
Broadheads and field points rarely share the same point of impact because the front-of-arrow mass and length differ, which changes how the shaft behaves in flight and how much the point interacts with the target. Shooters report a consistent discrepancy when they use the same sight setting for both. Confirm your zero with the exact hunting broadhead you will carry, at the distance you will shoot it, instead of assuming your field point group transfers.
Final Verdict: The Best Archery Targets for Broadheads in 2026
The best archery targets for broadheads depend on how you shoot, not on brand. The Black Hole 4-Sided is the pick for almost everyone, because the friction-not-force design is the rare construction that both survives blades and releases arrows by hand. Shoot heavier crossbow speeds and you move up to the Rinehart 18-1 Cube at 500 fps, or the SpyderWeb 18XL if your bolts run faster still. Shoot mostly fixed blades and hybrids in one spot and the self-healing foam cubes hold up best. Want anatomy practice before deer season, the Rinehart RhinoBlock is the one with deer faces built into the block.
Whichever you pick, rotate the faces, keep an arrow puller next to the target, and confirm your sight-in with the exact broadhead you will carry. Those three habits do more for the life of a target than anything printed on the box.