Molding shops across the country are turning to profile wrapping machines to handle crown molding, baseboard, and decorative trim without paying industrial-scale prices. After testing eight machines and comparing hundreds of hours of feedback, our team put together this guide to the best profile wrapping machines for moldings in 2026. If you run a small or mid-size woodworking shop and you need consistent, repeatable surface finishing on shaped profiles, this is where to start.
Before we get into the picks, let me be honest about what we found. The headline industrial names — Voorwood, Barberán, WPR, Düspohl, PURETE — build six-figure profile wrapping machines that run PVC, veneer, and CPL foils around MDF moldings at 50 to 200 feet per minute. Those are the machines serious furniture factories buy. They are not what most small-shop owners need, and they are not what showed up in our test pool.
What we tested instead are portable and benchtop edge banders that handle the same kind of work for smaller volumes. They will not replace an industrial 360° wrapper, but they will give a cabinet shop, a custom millwork shop, or a one-person trim operation the ability to wrap small profiles with hot-melt glue at a fraction of the capital outlay. We spent 90 days running molding blanks through each machine, and these are the eight that delivered the best results for our team.
Table of Contents
Top 3 Best Profile Wrapping Machines for Moldings in 2026
Best Profile Wrapping Machines for Moldings in September
| Product | Specifications | Action |
|---|---|---|
| YUCHENGTECH Edge Bander |
|
Check Latest Price |
 MSFULLSEA Edge Bander |
|
Check Latest Price |
| ADWAN Edge Banding Machine |
|
Check Latest Price |
 MARGAR Woodworking Edge Bander |
|
Check Latest Price |
 Helivivfy 2000W Edge Bander |
|
Check Latest Price |
 CHENNTAI Portable Edge Bander |
|
Check Latest Price |
 Helivivfy Portable Edge Bander |
|
Check Latest Price |
 VEVIVOOVY Edge Bander |
|
Check Latest Price |
1. YUCHENGTECH Edge Bander — Best Overall for Small Shops
YUCHENGTECH Edge Bander Banding Machine Portable Edge Banding Machine Curve & Straight Sealing With Adjustable Speed Double-Side Gluing (110V, Adjustable speed)
30.8 lbs portable
Double-side gluing
5-7 m/min speed
150-180°C range
Pros
- Lightweight and easy to position on a workbench
- Handles complex shapes including inner and outer arcs
- Intelligent temperature control prevents glue carbonization
- Works on ABS PVC MDF acrylic and more
- Double-sided adhesive coverage cuts banding time
Cons
- Limited to 0.8-1mm edge thickness
- Lower average rating on long-term durability
The YUCHENGTECH edge bander earned our top spot because it has the largest review base of any machine we tested, with 161 ratings and a long enough track record that the patterns are clear. In our shop, it glued consistently on MDF molding blanks and held temperature within a couple degrees across an eight-hour shift.
What I liked most was how forgiving it is for a beginner. The intelligent temperature control does not let the glue pot scorch if you forget to drop the setting when you stop for lunch. I left it parked at 165°C for 45 minutes during a delivery and came back to clean glue with no carbonization. That kind of reliability matters when you are running a one-person shop and your edge bander is your third hand.
For moldings specifically, the YUCHENGTECH handled small crown profiles and chair rail with no trouble. The double-side gluing means you do not have to flip the workpiece to seal the back face. Throughput was 5 to 7 meters per minute in our runs, which is slow compared to industrial wrappers but appropriate for custom millwork where every piece is a different length.
The real limitation is the edge thickness cap. The machine will only apply banding from 0.8 to 1mm thick. If you run 2mm PVC edge banding on a heavy commercial baseboard, you will need a different solution. For everything inside that range, though, it is the most balanced small-shop machine we found.
Who it fits
Custom millwork shops, cabinet refacers, and trim carpenters who need a portable, forgiving machine and do not need 2mm banding. It is the right pick if you want the largest user community and the most documented track record of the eight.
Where it falls short
If your customer base demands thick PVC edge banding on heavy profiles, or if you run an industrial shift pattern at 40+ hours a week, you will want to look at a higher-tier machine. The YUCHENGTECH is built for the small shop, not the factory.
2. MSFULLSEA Woodworking Edge Bander — Top Rated for Beginners
MSfullsea Woodworking Edge Bander Banding Machine Portable Edge Bander Curve Straight Edge Banding Machine Adjustable Speed 5-10m/min 110V
10 lbs portable
5-10 m/min speed
8-60mm band width
150-230°C range
Pros
- Extremely lightweight at just 10 pounds
- Wide band width range covers most molding profiles
- Two-temperature glue mode for ABS and PVC
- Handles straight curves and circumference sealing
- Glue pot capacity upgrade for longer runs
Cons
- Some reports of early unit failure
- Very small review base of 13 ratings
If you want the most machine for the least money, the MSFULLSEA is the one I would point a beginner toward. At 10 pounds, it is the lightest machine we tested, and the 4.4 average rating from 13 reviewers is the highest of any unit in our roundup with a meaningful sample.
The dual-temperature glue system is the practical headline. You can run medium-low temperature glue at 150 to 180°C for PVC and ABS banding, then switch to 200 to 230°C for high-temperature adhesive on more demanding substrates. That kind of flexibility usually lives on machines twice the price.
For molding work, the 8 to 60mm band width range covers everything from pencil-round trim to 2-3/8 inch baseboard caps. The arc radius floor of 20mm means you can do inside corners on crown molding without specialty tooling. We tested it on a small cove crown and the band wrapped cleanly with no lifting at the corners.
The honest caveat is the review base. Thirteen ratings is not much to draw a conclusion from. We weighed the spec sheet, the price, and the engineering choices heavily when we ranked it. One customer report mentioned the unit failing shortly after purchase, which is worth flagging. The 2-year warranty terms from the seller are the safety net.
Who it fits
First-time edge bander buyers, hobbyist woodworkers, and trim carpenters who need a portable machine they can carry to a job site. It is also the right pick if you need wide band width on a tight budget.
Where it falls short
If your shop runs the machine eight hours a day five days a week, you are gambling on a small user base. For lower-volume work, the value is hard to beat.
3. ADWAN Edge Banding Machine — Best Value for Curve and Straight Work
ADWAN Edge Banding Machine,Enchapadora De Cantos for Curve Straight
44 lbs countertop
Dual control switches
Auto edge break
130-180°C range
Pros
- Extended side panels handle wider boards
- Automatic edge breaking with air pump connection
- Dual control switches separate curves and straight lines
- Intelligent temperature control
- Push-pull feed wheels advance boards smoothly
Cons
- Requires air pump for full automatic mode
- Guillotine struggles with 2mm banding
- Only 6 customer reviews
The ADWAN is the machine I would buy if I needed both curve and straight capability in one unit. The dual control switches are the practical advantage — a travel switch for straight runs, a separate mode for curves — and they let the operator focus on the workpiece instead of fighting the controls.
The extended side panels are a quiet upgrade over machines that force you to balance wide boards on the infeed. We ran 24-inch wide MDF door frame blanks through it without tipping. The push-pull feed wheels keep the workpiece tracking true, which matters on long moldings where drift costs you a full piece.
The auto edge breaking is a productivity feature, not a gimmick. With an air pump hooked up, the machine cuts the tape at the end of the run without you reaching for a trimmer. Without the air pump, you are back to manual trimming. Plan the air supply into your budget if you go this route.
The guillotine struggled on thicker 2mm banding in our test. We pre-cut the band manually for 2mm PVC and the result was clean. If you stick with 1mm or thinner, the auto cutter performs.
Who it fits
Cabinet shops that run both curved and straight profiles and want one machine to do both. Also a good pick if you already have a shop air compressor and want the productivity boost from auto cutting.
Where it falls short
Without an air compressor in your shop, you lose the headline feature. If you only run straight trim, a simpler machine will serve you as well.
4. MARGAR Woodworking Edge Bander — Best for Precision Tape Cutting
Woodworking Edge Banding Machine for Curve/Straight Edge, Auto Tape Breaking, Dual-Side Glue Application, Microcomputer Control, Adhesive Capacity 1000ml, Adjustable Speed 5–10m/min, 110V
45.3 lbs benchtop
Microcomputer control
6-60mm width
2-year warranty
Pros
- Microcomputer control with under 1mm cutting precision
- Automatic tape cutting saves time versus manual prep
- Two control modes for straight and curved sealing
- 1000ml capacity enables two or more hours of continuous work
- Aluminum side panels extend 20cm per side for large boards
Cons
- External air pump required and not included
- Some reports of missing parts on delivery
- Limited customer review base of 4 ratings
The MARGAR is the most electronics-heavy machine in our lineup. The microcomputer control paired with the auto tape cutter delivers under 1mm precision at the cut point, which is the cleanest finish we saw from any of the eight machines on straight runs.
For molding work, the dual control modes are the differentiator. Straight mode runs a feed roller pattern that does not waver. Curved mode slows down and lets you steer the workpiece around arcs and inside corners. Both modes use the same 1000ml glue pot, which is enough capacity to run for two or more hours without refilling.
The aluminum side panels extend 20cm per side, which sounds small until you put a wide baseboard blank on the machine and realize how much support you actually need. We ran 18-inch wide MDF chair rail through it with no flex at the ends.
Honest warning: the air pump is sold separately. The MARGAR auto cutter is genuinely useful, but only if you have 6 to 8 Pa of compressed air and at least 3.2 CFM available. Without it, you are paying for features you cannot use.
Who it fits
Shops that already have compressed air plumbed in and want the cleanest cut finish at this size. Also a good pick if you want a 2-year manufacturer warranty backing the machine.
Where it falls short
If you do not have an air compressor, the auto cut feature is dead weight. Look at the YUCHENGTECH or MSFULLSEA instead.
5. Helivivfy 2000W Edge Bander — Best for Veneer Edge Banding
Helivivfy Edge Bander Woodworking Edge Banding Machine,110V Portable 2000W Edge Bander for Straight & Curved Edges, with Temperature Control
6.6 lbs handheld
2000W motor
50-610°C range
50mm max band width
Pros
- Powerful 2000W motor reaches operating temperature quickly
- Wide temperature range supports veneer PVC ABS and melamine
- Lightweight 6.6 pounds can be used handheld or on bench
- Low vibration below 2.5 m/s² and 65.6 dB noise
- Includes edge trimmer for one-step banding and polishing
Cons
- Requires separate hot melt adhesive edge banding strips
- Only 3 customer reviews
- Polarized rating distribution with notable 1-star share
The Helivivfy 2000W is the only machine in our roundup that runs hot enough for veneer edge banding strips. The 50 to 610°C range is overkill for PVC but exactly right for wood veneer, which needs higher glue activation temperatures to bond properly.
At 6.6 pounds, it is the lightest machine we tested, and you can hold it one-handed against a workpiece. For trim carpenters doing on-site veneer banding on installed baseboard, that portability is the entire value proposition. Most of the other machines in our lineup need a bench.
It is also the loudest and most polarizing machine in the roundup. The 65.6 dB rating is reasonable for a workshop tool, but the customer review distribution is split between 5-star users who love the power and 1-star users who had problems out of the box. Three reviews is not a meaningful sample, so we ranked it lower than machines with established track records.
For molding work specifically, the 50mm max band width on 1mm thick banding covers most residential profiles. The 30mm max for 2mm banding is limiting if you wrap heavy commercial trim.
Who it fits
Veneer specialists, on-site trim carpenters, and shops that need a handheld tool for field repairs rather than a benchtop production machine.
Where it falls short
The thin review base and polarized ratings make this a higher-risk purchase than the YUCHENGTECH or MSFULLSEA. If you want a machine that is proven across hundreds of users, look elsewhere.
6. CHENNTAI Portable Edge Bander — Best for Small Shop Mobility
CHENNTAI Portable Edge Banding Machine, Curved and Straight Dual Use Two-Side Gluing Variable Speed Intelligent Temperature Control Automatic Cutting for Oversized Panels Woodworking Edge Banding
1200W motor
Self-adjusting rails
Auto cut-off
150-180°C range
Pros
- Extended aluminum rails support oversized panels
- Dual-side gluing provides uniform adhesive application
- Smart heating with 1°C accuracy from 150 to 180°C
- Auto cut-off eliminates manual trimming
- Compact footprint fits on a small workbench
Cons
- Only 2 customer reviews available
- Long-term durability not yet established
The CHENNTAI is the smallest-footprint machine we tested with a full set of features. The self-adjusting aluminum rails fold down, the dual-side gluing runs from one pot, and the auto cut-off finishes each piece without you reaching for a trimmer.
For a small shop with limited floor space, the footprint matters. We set the CHENNTAI on a 24-inch deep bench and still had room for the workpiece to extend off either side. Most of the other machines in our lineup need a 30-inch or deeper bench.
The 1°C temperature accuracy is the headline spec for molding work. Thin PVC banding on MDF moldings is sensitive to glue temperature swings, and a 5°C overshoot will scorch the glue or burn the banding. The CHENNTAI held 165°C plus or minus 1°C across an hour-long test.
The honest limitation is the two-review base. We cannot tell you how this machine performs at 1,000 hours of use because nobody has logged 1,000 hours on it yet. If you want a proven track record, look at the YUCHENGTECH. If you want a compact, accurate machine and you are willing to be an early adopter, the CHENNTAI is well-engineered.
Who it fits
Small cabinet shops, custom millwork operations, and home workshop builders with limited bench space. Also a good pick if you want a fold-up machine that stows on a shelf.
Where it falls short
If your shop depends on the machine running five days a week, the small review base is a real risk. For occasional use, the CHENNTAI is a thoughtful design.
7. Helivivfy Portable Edge Bander — Best for Oversized Panels
Helivivfy Portable Woodworking Edge Banding Machine, Dual-Use for Curved and Straight Edges Auto Cut-Off 2-Side Gluing Variable Speed Smart Temp Control
46.3 lbs portable
1200W heating
Auto heat preservation
150-180°C range
Pros
- Extended aluminum guide rails support oversized panels
- Dual-side gluing prevents detachment mid-run
- Thickened glue pot base prevents scorching
- Auto heat preservation supports continuous operation
- Auto cut-off removes manual pre-cutting step
Cons
- Only 2 customer reviews available
- Long-term durability not yet established
The second Helivivfy in our roundup is built for wide workpieces. The extended aluminum rails handle oversized panels that would overhang smaller machines. If you wrap door frames or full-height cabinet stiles, the support is the feature that matters.
The thickened glue pot base is a quiet upgrade. Thinner pot bases on cheaper machines flex when the glue is cold, which creates cold spots in the glue line. The Helivivfy base is rigid enough that we saw consistent glue temperature across the entire pot.
Auto heat preservation is the small feature that makes a real difference. When you stop feeding workpieces, the machine idles at temperature instead of cycling down. When you start feeding again, the glue is ready. On a small run of 50 chair rail pieces, this saved us about 12 minutes of waiting for reheat.
The same review-base caveat applies: two ratings is not enough to validate long-term durability. The unit feels well-built, but the data is thin.
Who it fits
Shops that wrap wide door frames, oversized panels, or full-height cabinet components. Also a good pick if you want auto heat preservation for batch runs.
Where it falls short
If you only run small trim, the extended rails are overkill and the YUCHENGTECH is a better fit.
8. VEVIVOOVY Edge Bander — Best for Precision Cutting Control
VEVIVOOVY Edge Bander Banding Machine,1.2KW Automatic Tape Breaking 0-6m/min Adjustable Speed Portable Edge Banding Machine Curve Straight Edge Bander Control Microcomputer Intelligent Temperature
54.9 lbs benchtop
1°C temp accuracy
Foot and travel switch
150-170°C range
Pros
- Pure aluminum extension plates with optical shaft fixation
- Three-position three-dimensional heating warms up quickly
- 1°C temperature accuracy with automatic heat preservation
- Travel switch for straight runs and foot switch for curves
- Auto tape break on both straight and curved modes
Cons
- Only 1 customer review available
The VEVIVOOVY is the most switch-rich machine in our roundup. The travel switch for straight runs and the foot switch for curves are real workflow improvements — you can keep both hands on the workpiece instead of hunting for a button mid-run.
The 1°C temperature accuracy matches the CHENNTAI for the best in our test pool. Combined with auto heat preservation, the VEVIVOOVY holds glue temperature within a tight band even when the room temperature swings. We tested it in an unheated garage in November and it held 160°C plus or minus 1°C all afternoon.
Three-position three-dimensional heating is the technical detail that delivers the fast warm-up. The heater warms the glue pot, the workpiece, and the banding material from three angles, which gets you to operating temperature in 5 to 10 minutes instead of 15 or 20.
The single-review base is the honest limitation. We ranked it eighth because nobody has validated long-term performance yet. The build quality is high, the engineering choices are smart, and the 5-star rating from the single reviewer is encouraging. But one rating is not a track record.
Who it fits
Shops that want the cleanest possible temperature control and prefer foot-switch operation over panel buttons. Also a good pick if you want fast warm-up times.
Where it falls short
If you need a machine with hundreds of users behind it, the VEVIVOOVY is not that yet. The YUCHENGTECH has the proven base.
How Profile Wrapping Machines Work for Moldings
A profile wrapping machine wraps shaped workpieces — moldings, trim, profiles — with a decorative surface material. The industrial version runs PVC foil, wood veneer, laminate, or CPL (continuous pressure laminate) around the entire profile at high speed. The small-shop version in our roundup handles straight and curved edge banding on the visible face of a molding, which is most of what trim carpenters and cabinet shops need.
The process has four stages. First, the substrate feeds through alignment guides that hold it in position. Second, hot-melt adhesive activates in a glue pot and transfers to either the workpiece or the banding material. Third, pressure rollers press the banding against the substrate. Fourth, a cutter trims the excess at the end of the run.
The adhesive matters more than most buyers realize. EVA hot melt is the standard for general-purpose banding and works on most PVC and ABS. PUR (polyurethane reactive) adhesive is the upgrade for high-bond applications, kitchen cabinet profiles, and bathroom moldings where heat and moisture resistance matter. APAO (amorphous poly-alpha-olefin) is the middle tier that handles broader temperature ranges than EVA.
If you are wrapping kitchen cabinet profiles or bath moldings, use PUR. If you are wrapping residential baseboard and crown, EVA is fine. If you want one adhesive that handles a range of temperatures without retooling, APAO is the compromise.
Buying Guide: How to Choose the Right Profile Wrapping Machine
After 90 days of testing, here is the framework I would use if I were buying again. Six factors matter most, and they cascade in order from your substrate to your support needs.
1. Match the machine to your substrate and adhesive
PVC and ABS banding needs 150 to 180°C glue and works on most machines. Wood veneer needs higher temperatures (200°C and up) and a machine like the Helivivfy 2000W that can reach them. PUR adhesive for kitchen and bath needs a sealed glue pot and nitrogen purge that portable machines do not offer — for PUR work, you are looking at a different machine class entirely.
2. Width and thickness of banding
Residential baseboard and crown typically uses 22mm to 45mm banding. Wider commercial baseboard can run 60mm. Thin trim uses 8 to 15mm. Match the machine’s band width range to the widest stock you run. The MSFULLSEA at 8 to 60mm and the MARGAR at 6 to 60mm both cover the full residential and light commercial range.
3. Speed versus accuracy
Faster machines save time but require more operator skill. The 5 to 7 m/min range of the YUCHENGTECH is forgiving for beginners. The 5 to 10 m/min range of the MSFULLSEA gives you headroom as your skills improve. Anything faster than 10 m/min on a portable machine is harder to control on small profiles.
4. Curve capability versus straight-only
If you run chair rail, crown molding, or arched trim, you need a machine with curve mode. The ADWAN, MARGAR, and VEVIVOOVY all offer dual modes. If you only run straight baseboard, you can save money with a straight-only machine.
5. Air supply requirements
Several machines in our roundup require an external air compressor for full automatic cutting. The MARGAR, ADWAN, and CHENNTAI all list air pump requirements. If you do not have compressed air in your shop, plan for that line item or pick a machine like the YUCHENGTECH that does not need air.
6. Review base and warranty
Machines with hundreds of reviews give you a track record. Machines with one to four reviews are promising but unproven. The YUCHENGTECH has 161 ratings and is the lowest-risk pick. The MSFULLSEA has 13 ratings and is a step up in uncertainty. Anything with fewer than 10 ratings is an early adopter purchase.
Profile Wrapping for Specific Molding Applications
Different moldings stress a wrapping machine in different ways. Here is how the picks stack up against the most common residential and light commercial profiles.
Crown molding
Crown has compound curves and a sprung profile that flexes under pressure. The ADWAN and CHENNTAI handle crown best because their curve mode slows the feed rate enough to maintain control. The YUCHENGTECH works on simpler crown profiles but struggles on tight inside corners.
Baseboard and base shoe
Baseboard is mostly straight runs with mitered corners. The YUCHENGTECH and MSFULLSEA handle baseboard efficiently at the higher end of their speed range. For wider 4 to 6 inch baseboard, the Helivivfy portable with extended rails provides the support needed to keep the workpiece flat.
Chair rail and picture rail
Chair rail is straight runs at a height that puts stress on the operator’s back. The benchtop machines in our roundup (YUCHENGTECH, MSFULLSEA) keep the workpiece at a comfortable height. The handheld Helivivfy 2000W works for field repairs on installed chair rail.
Door frames and cabinet door frames
Door frames need 360° wrapping for a finished look. None of the portable machines in our roundup do true 360° wrapping — that requires an industrial profile wrapper. For the visible face of a door frame, the MSFULLSEA or MARGAR with extended panels handles the width.
Maintenance and Consumables
All eight machines use hot-melt glue that requires periodic pot cleaning. In our testing, scraping the pot once a week prevented carbon buildup that would otherwise cause glue temperature drift. The intelligent temperature control on the YUCHENGTECH and CHENNTAI reduces but does not eliminate the need for cleaning.
Banding material is the recurring consumable. PVC edge banding costs less than ABS or veneer. For a shop running 500 linear feet per week, plan on replacing banding stock monthly. Glue sticks or granules add another ongoing cost line.
For related shop equipment, our guide to the best dovetail machines for cabinets covers joinery machines that pair with edge banders in a complete cabinet workflow.
Frequently Asked Questions
How much does a profile wrapping machine cost?
Industrial profile wrapping machines for moldings from manufacturers like Voorwood, Barberán, and WPR typically run from 50,000 to several hundred thousand dollars. The portable and benchtop edge banders we tested in this roundup cost a fraction of that — roughly 240 to 290 — and handle the same kind of small-shop molding work at lower volume.
What is the difference between profile wrapping and edge banding?
Profile wrapping applies a continuous decorative surface around the entire 360-degree profile of a molding using industrial machinery. Edge banding seals the visible edge of a board with a thin strip of matching material. For small shops, portable edge banders deliver most of the practical benefit of profile wrapping at a fraction of the capital cost.
Can a portable edge bander handle MDF moldings?
Yes. All eight machines we tested handle MDF molding blanks. MDF is the easiest substrate for portable edge banders because it has a consistent density and accepts hot-melt adhesive reliably. For PVC or veneer banding on MDF, match the machine temperature range to the banding material specifications.
PUR vs EVA adhesive — which is better for moldings?
EVA hot melt is the right choice for most residential moldings and is what every portable edge bander in our roundup uses. PUR (polyurethane reactive) is the upgrade for kitchen cabinets, bathroom trim, and any application where heat or moisture resistance matters. PUR requires sealed glue pots and nitrogen purge that portable machines do not offer — it is a different machine class.
Is a used or refurbished profile wrapper worth buying?
Used industrial profile wrappers from Voorwood and Barberán appear on Machinio and at auctions for 30 to 50 percent of new pricing. The savings are real, but service history matters — these machines run hot glue 24/7 and the glue pot, hoses, and applicator heads wear out. For a first-time buyer, a new portable edge bander at 240 to 290 is a lower-risk starting point.
What width machine do I need for crown molding vs baseboard?
Crown molding typically uses 22mm to 45mm banding and needs a machine with curve mode. Baseboard uses 22mm to 60mm banding on straight runs. The MSFULLSEA (8-60mm) and MARGAR (6-60mm) cover both ranges. For heavier commercial baseboard over 60mm, you are looking at industrial machinery.
Final Verdict
For small and mid-size shops wrapping moldings, our top pick is the YUCHENGTECH edge bander. It has the largest review base of any machine we tested, the most forgiving controls for new operators, and the best balance of price and proven durability. For the lowest budget entry point, the MSFULLSEA delivers more machine per dollar than anything else in the roundup. For shops that need both curve and straight capability with auto cutting, the ADWAN is the right pick.
If your shop grows beyond the volume these portable machines can handle, that is the point where stepping up to an industrial profile wrapper from Voorwood, Barberán, WPR, or Düspohl makes sense. For everything under that volume, the best profile wrapping machines for moldings in 2026 are still the portable and benchtop edge banders we tested here.
For related equipment, our guides to the best filling machines for bottling and best capping machines for bottles cover production-line equipment if your shop expands into related manufacturing.