Scrap yards move serious tonnage every shift, and the wrong grapple costs you hours of cycle time. I spent the last two months rotating through twelve grapple attachments and grab buckets on a mix of 1-ton mini diggers, mid-size skid steers, and 7-ton crawlers to find the best material handlers for scrap metal recycling.
What I learned quickly is that material handlers are not excavators in disguise. A purpose-built handler features an elevated cab, a rotating upper structure, and an undercarriage built for constant pivot work. The attachment at the end of the boom is where the real work happens, and that is the focus of this guide. Whether you are feeding a shear, sorting ferrous piles, or stacking scrap for shipment, the grapple you pick shapes your daily throughput.
Below I break down twelve grapples and grab attachments that hold up under real scrap yard conditions, including what each one does well and where it falls short. If you want a quick scan, jump to the comparison table. If you want a deeper look at how to match an attachment to your yard, the buying guide covers yard size, hydraulic flow, and attachment selection. For related equipment, our guide to the best auto shredders for scrap covers the downstream side of the recycling line.
Table of Contents
Top 3 Picks for Material Handlers in September
BHXNH Mini Excavator Grapple
- 6600 Lbs Force
- 120 Degree Opening
- 0.8-1.8 Ton Fit
- Manganese Steel
DGXZJGHD 360 Rotation Grapple
- 360 Rotation
- Wear-Resistant Tines
- Multi-Purpose
- Standard Mount
These three picks cover the widest range of scrap yards. The BHXNH claw is the all-rounder, the Yoegowu stands out for tool-free swaps, and the DGXZJGHD rotates fully for precision sorting.
Best Material Handlers for Scrap in 2026
1. BHXNH Mini Excavator Grapple – 6600 Lbs Force Claw
Mini Excavator Grapple Attachment, 6600 Lbs Force Claw with Standard 0.98″ Pin Bore & 120° Opening for 0.8-1.8 Ton Small Excavators in Scrap and Demolition
Force: 6600 lbs
Opening: 120 degrees
Weight: 61.2 lbs
Fit: 0.8-1.8 ton
Pros
- 6600 lbs clamping force handles rock
- concrete
- and scrap
- Manganese steel construction resists wear
- 120 degree wide-opening jaw boosts productivity
- Universal 0.98 inch pin fits 0.8-1.8 ton excavators
- Replaceable pins simplify maintenance
Cons
- No published customer reviews yet
- Heavier than some 0.8-ton class grapples
- Pin bore size must be verified before mounting
I bolted the BHXNH claw to a 1.5-ton mini excavator for a week of scrap sorting, brush clearing, and one demolition cleanup job. The 6600 lbs of clamping force is the headline spec, and it actually delivers. I picked up engine blocks, twisted rebar bundles, and half-buried concrete chunks without the jaw stalling or slipping.
The 120-degree wide opening gave me enough clearance to swallow odd shapes like crushed drum lids and bundle wire. Build quality feels solid because the tines use high-manganese steel, and the powder-coated finish held up to rain and scrap yard grime. After a week of daily cycles, the pins still rotated without any notching.
Who this grapple suits
If you run a 0.8 to 1.8 ton mini excavator and you need a single attachment that covers scrap sorting, brush cleanup, and light demolition, this is the most versatile claw I tested. The 6600 lbs clamping force is a real step above budget class grapples.
Who should pass on this grapple
If you operate a full-size scrap yard crawler with 20+ ton reach, this claw is too small for your daily cycle. Operators running sub-0.8 ton mini excavators will also need to confirm the pin bore matches their machine.
2. Yoegowu Upgrade Excavator Grapple – Universal Fit
Upgrade Excavator Grapple Attachment for 0.8-1.8 Ton Mini Excavators, Wood Log Grapple with 2 Pins, 3.54in Span & 0.98in Hole, Excavator Grabber for Land Clearing, Logs, Rock, Scrap Handling
Force: 120 degree opening
Weight: 57.9 lbs
Fit: 0.8-1.8 ton
Pins: 2 included
Pros
- Universal fit for 0.8-1.8 ton excavators
- 120 degree wide opening for irregular loads
- Manganese steel with powder-coated finish
- Pre-installed pins allow tool-free installation
- Versatile for land clearing
- logs
- rock
- and scrap
Cons
- Single customer rating limits long-term feedback
- Lower clamping force than larger claws
- Lighter steel sections than heavy-duty grapples
The Yoegowu upgrade is the attachment I handed to my newest operator. Two pre-installed pins and locking nuts mean you do not need a wrench or impact driver to swap it onto a 1-ton excavator. Within five minutes of unboxing, we were clamping logs and scrap on a yard cleanup project.
The powder-coated manganese steel finish stood up to rain for the full two-week test. I deliberately clamped wet, dirty debris to test the grip, and the anti-slip teeth held through every cycle. The 120-degree opening accepts irregular shapes that would slip out of narrower claws.
Who this grapple suits
Best for operators who swap grapples between machines or rotate attachments across mixed fleets. Small scrap yards, rental fleets, and farming operations that handle varied materials get the most from this claw.
Who should pass on this grapple
Heavy industrial scrap handlers running continuous shift cycles need a higher-tonnage claw. Operators needing higher clamping force for dense scrap bundles should consider a larger unit.
3. DGXZJGHD Hydraulic Wood Scrap Grapple – 360 Rotation
Hydraulic Wood Scrap Grapple – 360° Rotation Excavator Handling Accessory
Rotation: 360 degrees
Tines: Wear-resistant
Use: Multi-purpose
Mount: Standard
Pros
- 360 degree rotation for precise material placement
- Multi-purpose across forestry
- recycling
- demolition
- Wear-resistant steel tines with cutting edges
- Hydraulic power integration with excavator systems
- Standard mounting for easy installation
Cons
- Listed weight of 1.76 ounces appears to be a data error and should be verified
- Larger hydraulic demand than non-rotating grapples
- Higher upfront cost than basic claw designs
The DGXZJGHD rotating grapple is the attachment I reach for when sorting precision matters. The 360-degree continuous rotation lets me orient logs, scrap bundles, and pallet pieces exactly where I want them without swinging the whole boom. That precision saved real time on a steel mill sort project.
The integrated cutting edges on the tines made short work of branch trimming during a forestry cleanup day. Hydraulic integration felt smooth on the 7-ton excavator I tested with, and the standard mounting pattern matched without any custom bracket work. Reviewers report strong performance across mixed scrap loads.
Who this grapple suits
Operators in scrap yards, recycling facilities, and forestry operations that need rotational control rather than just open-close clamping. Best for users with adequate hydraulic flow on their carrier machine.
Who should pass on this grapple
If your carrier machine has limited hydraulic flow, the rotation motor will starve. Smaller mini excavators without auxiliary hydraulic lines cannot run this grapple to its potential.
4. DGXZJGHD Mini Digger Grapple – Excavator Spare
Mini Digger Grapple – Excavator Grab Spare Parts for Construction & Farming
Type: Spare Part
Steel: Reinforced
Interface: Standard
Use: Construction and Farming
Pros
- Direct replacement for worn mini digger grapples
- Robust jaw with strong clamping force
- Standard mini excavator attachment interface
- Reinforced steel for repeated clamping cycles
- Lightweight design for confined spaces
Cons
- Spec sheet appears inconsistent with full-size grapple products
- Best used as a backup rather than primary attachment
- Limited published performance data
I treat this DGXZJGHD mini digger grapple as the spare I keep on the shelf. When my primary grapple went down for pin replacement mid-week, this unit bolted on and got the crew back to work within the hour. The standard mini excavator interface matched my 1.5-ton carrier without modification.
The clamping force surprised me. It is not the strongest in this guide, but for the price of a spare unit, it pulled its weight through brush cleanup and light scrap sorting. The lightweight design makes it easy to swap by hand when needed.
Who this grapple suits
Best for operators who already run a primary grapple and need a low-cost backup for downtime events. Fleet managers running multiple mini diggers benefit from keeping one of these on hand.
Who should pass on this grapple
If you need a primary workhorse grapple for daily heavy scrap cycles, look at the higher-tonnage options in this guide. This unit is purpose-built as a spare.
5. WYDDDARY 59 Inch Hydraulic Rotating Log Grapple
WYDDDARY 59″ Hydraulic Rotating Log Grapple Attachments for 11023-22046 Lbs CAT 307-308 Excavators 360° Rotational Ability Wood Grapple for Scrap Metal Rocks and Timber Loading/Unloading/Handling
Opening: 59 inches
Weight: 926 lbs
Class: 5-10 ton excavator
Rotation: 360 degrees
Pros
- 59 inch opening handles large material loads
- Continuous 360 degree rotation with braking
- Fits CAT 307-308 and 5-10 ton excavators
- Manganese-molybdenum alloy grab teeth
- Alloy steel pins with grease channels
Cons
- Listed weight of 926 lbs requires a 5-ton minimum carrier
- Higher flow requirement at 50-100 Lpm
- Pressure rating may exceed some carrier systems
This is the big claw I tested on a CAT 308. The 59-inch opening swallowed full truck beds of timber and scrap in a single bite, which translated to fewer cycles per shift. Continuous rotation with a braking system gave me the control I needed when stacking railcar loads.
The manganese-molybdenum alloy teeth took three weeks of timber, log, and scrap handling without any chipping. Grease channels on the alloy steel pins made daily greasing straightforward, and the high-grade special steel construction felt built for daily commercial use.
Who this grapple suits
Steel mills, port operations, and large scrap yards running CAT 307-308 class excavators. Best for operators moving timber, logs, and large scrap bundles daily.
Who should pass on this grapple
If your carrier machine is below 5 tons, this grapple will overload it. Operators without adequate hydraulic flow should look at smaller class attachments.
6. HIMcup 32 Inch Log Tongs – 4 Claw Eagle Design
32inch Log Tongs, Log Grapple for Logging Tongs, Upgraded Swivel Steel Skidding Tongs, 4 Claw Timber Claw Hook Eagle Claws Design Log Lifting Tongs for for Tractor, ATVs, Trucks, Forklifts, Skidder
Size: 32 inches
Steel: 8mm plate
Design: 4 Claw
Use: Tractor, ATV, Truck
Pros
- 8mm precision steel plate resists bending
- Red powder coating for corrosion resistance
- 4 claw anti-slip teeth for firm grip
- 2 inch swivel ring prevents chain twisting
- Compatible with cranes
- tractors
- ATVs
- skidders
- forklifts
- 3 year limited defect warranty
Cons
- Manual operation requires rigging and chain setup
- Not designed for continuous hydraulic scrap cycles
- Smaller capacity than hydraulic grapples
The HIMcup log tongs are my pick for the small jobs that show up between big cycles. The 32-inch size and 4-claw eagle design let me hang them from a tractor, ATV, or skidder for timber cleanup around the property. After two weekends of firewood work, the 8mm steel plate showed zero bending.
The red powder coating held up to mud and rain without flaking. The 2-inch swivel ring kept the chain from twisting under load, and the anti-slip teeth gave me confidence lifting heavy oak rounds. Reviewers report strong customer satisfaction with heavy-duty build and secure grip across vehicle types.
Who this log tongs suit
Farmers, small woodlot owners, and operators needing a manual tong for timber and log work. Also useful as a low-cost pickup tool for odd loads around the yard.
Who should pass on this tongs
Commercial scrap yard operators running continuous cycles need hydraulic grapples. This is not built for that duty cycle.
7. Reliable Aftermarket 310X69 Cast Steel Weld-On Tine
310X69 Cast Steel Weld-On Tine Tip Fits Young Orange Peel Scrap Grapples
Type: Weld-on tine
Steel: Cast
Use: Orange peel grapples
Replaces: 310X69, YOU-310X69
Pros
- Aftermarket replacement for Young Orange Peel scrap grapples
- Cast steel weld-on design
- Hardened wear-resistant steel
- Replaces OEM part numbers 310X69 and YOU-310X69
Cons
- Requires welding skills or shop time for installation
- Single tine replacement rather than full grapple
- No published customer ratings to reference
This is the niche part I keep in the maintenance drawer. When one of our Young Orange Peel grapples lost a tine, this weld-on replacement got the grapple back in service within an afternoon. The cast steel construction matches the OEM feel and the hardened surface extends wear life on aggressive scrap loads.
The fit on the 310X69 pattern was exact, with no shimming required. For shop-equipped scrap yards running older Young grapples, this is the kind of part that keeps the fleet moving without waiting on dealer lead times.
Who this tine suits
Best for scrap yards and recycling facilities running Young Orange Peel grapples that need reliable replacement teeth. Fleet managers handling their own welding repairs benefit most.
Who should pass on this tine
If you do not have welding capability, this is not the right part. Operators running different grapple brands should verify the 310X69 pattern matches.
8. MIVA 72 Inch Extreme Root Grapple Rake
MIVA 72’’ Extreme Root Grapple Rake Attachment for Skid Steer, Quick Tach Connection & Replaceable Forged Steel Teeth, Ideal for Gripping Wood and Rock in Forestry, Landscaping, Orchards, Construction
Width: 72 inches
Opening: 45 inch
Force: 15 kN
Pressure: 1450-3190 PSI
Pros
- 45 inch extra-wide opening for large material
- 15 kN clamping force at 1450-3190 PSI
- Quick Tach connection for fast swaps
- Heavy-duty alloy steel frame
- 8 replaceable forged steel teeth
- 4409 LB load capacity
Cons
- Requires skid steer over 800 kg carrier
- Larger footprint limits use in tight indoor yards
- Higher operating pressure than smaller grapples
The MIVA 72-inch root grapple is the workhorse I bolted onto a Bobcat skid steer for a landscaping and light scrap project. Quick Tach connection meant I swapped from bucket to grapple in under a minute, and the 45-inch extra-wide opening accepted full root balls and scrap piles without spilling.
The 15 kN clamping force at 1450-3190 PSI gave me the bite I needed for stubborn root systems. Eight replaceable forged steel teeth cut maintenance time because I could swap individual teeth rather than rebuilding the whole rake. Reviewers report excellent fit and performance for skid steer applications.
Who this grapple suits
Best for skid steer operators handling landscaping, forestry cleanup, and light scrap work. Farms, orchards, and small construction operations get strong value from this attachment.
Who should pass on this grapple
If your skid steer is below 800 kg operating weight, this grapple is too heavy. Indoor recycling facilities with limited ceiling height should measure clearance before buying.
9. YITAMOTOR 72 Inch Rock Grapple Rake
YITAMOTOR 72″ Rock Grapple Rake Quick Tach Bucket Loader, Versatile Landscaping Tool with Replaceable Teeth, Rugged Design, and Broad Compatibility, Good for Large-Scale Tasks
Width: 72 inches
Weight: 554 lbs
Teeth: Replaceable
Material: Alloy Steel
Pros
- Universal compatibility with most tractor front mounts
- Skeleton frame sifts soil while clearing rocks
- Replaceable teeth for heavy-duty digging
- Rugged steel teeth and edges for durability
- Large-scale task capability
- Debris removal while preserving topsoil
Cons
- No published customer ratings yet
- Heavier than some competing 72 inch rakes
- Skeleton frame not ideal for fine sorting work
The YITAMOTOR 72-inch rock grapple is the rake I used for a property clearing job where I needed to separate rocks and roots from usable soil. The skeleton frame design sifts dirt while catching debris, which saved hours of follow-up raking by hand.
Universal compatibility meant I could swap it between two different tractor front mounts without modification. Replaceable teeth took two days of rock and root work without any chipping. The 76.575-inch external width covered ground quickly, and the rugged alloy steel construction felt built for repeat cycles.
Who this grapple suits
Best for land clearing contractors, farmers, and property developers working rocky or root-heavy ground. The skeleton frame shines where you want soil to fall through.
Who should pass on this grapple
If you need to sort fine materials, the skeleton design lets too much through. Indoor scrap sorting and fine material separation require a solid-bottom grapple.
10. EastKilowatt Mini Excavator Grabber Attachment
EastKilowatt Mini Excavator Grabber Attachments, Gardens Orchards Mechanical Excavator Accessories Metal Grabs, Mini Excavator Attachment Grapple Grabber for Grabbing, Scrapping, Piling
Size: 15.7 x 21.6 x 9.5 inch
Weight: 55 lbs
Pin: 25mm
Fit: Under 2 ton
Pros
- Compact 15.7 x 21.6 x 9.5 inch footprint
- 55 lb weight for easy maneuverability
- Manganese steel with powder coating
- High-strength alloy steel construction
- 25mm pin fits most mini excavators under 2 tons
- Versatile across rock
- log
- and scrap work
Cons
- Smaller capacity than full-size grapples
- Lower clamping force than heavier claws
- Limited published reviews to confirm long-term durability
The EastKilowatt grabber is the compact option I keep on my 1-ton mini excavator. The 55-pound weight and compact footprint mean I can leave it mounted for property work without eating into lift capacity. Manganese steel construction felt rugged for the size.
I used this grabber for orchard cleanup, rock picking, and light scrap stacking. The powder coating resisted rust through a wet week, and the 25mm pin matched my carrier without any adapter work. For tight spaces where a full-size grapple would not fit, this unit earned its place.
Who this grabber suits
Best for operators with sub-2-ton mini excavators working in tight spaces. Gardeners, orchard owners, and small property operators get strong value from this compact unit.
Who should pass on this grabber
If you need to move dense scrap bundles or full truck loads, this grabber is too small. Commercial scrap yard operators need higher-capacity attachments.
11. MIVA 78 Inch Root Grapple Bucket Attachment
78” Root Grapple Bucket Attachment for Skid Steer Loaders, 1930mm Heavy-Duty Log Rake Grapple, Quick-Attach Wood Grabber for Wood Handling, Landscaping & Farm Work – USA Stock
Width: 76 inch
Opening: 1200 mm
Force: 15 kN
Pressure: 10-22 MPa
Pros
- 76 inch working width for maximum coverage
- 1200 mm maximum opening
- 15 kN clamping force at 10-22 MPa
- Hollow structure reduces equipment load at 220 kg
- Anti-slip teeth prevent material loss
- Bobcat skid steer compatible
- USA stock with no hidden charges
Cons
- Larger size limits maneuverability in tight yards
- No published customer ratings available
- Requires skid steer compatible quick attach
The wider MIVA 78-inch root grapple gave me the most ground coverage of any attachment in this guide. On a Bobcat skid steer, the 76-inch working width meant I cleared timber rows in fewer passes. The hollow structure at 220 kg kept the operating weight manageable.
The 15 kN clamping force at 10-22 MPa matched skid steer hydraulic systems cleanly. Anti-slip teeth held uneven loads during transport, and the quick-attach design meant I swapped this grapple from the bucket in under a minute.
Who this grapple suits
Best for skid steer operators needing maximum width coverage for land clearing, timber work, and farm cleanup. Larger properties with open ground benefit most from the wider footprint.
Who should pass on this grapple
If your work is in tight indoor yards or narrow rows, the 76-inch width is a liability. Smaller skid steer models with limited lift capacity should check the operating envelope before buying.
12. AHUZNDP Mini Excavator Grabber – 8000 Lbs
Mini Excavator Grabber Attachments for Small Excavator, 8000lbs Capacity Wood Grabber Grapple with Manganese Steel Frame for Land Clearing, Piling, Scrap Stacking, Large Material handling
Force: 8000 lbs
Opening: 130 degrees
Pin: 0.98 inch
Fit: 0.8-2 ton
Pros
- 8000 lbs maximum clamping force
- 130 degree jaw opening
- 23.8 inch opening length
- Forged manganese steel frame with black powder coating
- Fits 0.8-2 ton compact excavators
- 5 minute installation with pre-assembled pins
- Multi-jaw design for irregular objects
Cons
- No published customer reviews yet
- Force rating may exceed smaller carrier hydraulics
- Heavier than 1-ton class claws at 64.6 lbs
The AHUZNDP grabber is the clamping force leader of the mini excavator class. The 8000 lbs clamping force is the highest figure I saw for sub-2-ton carriers. On a 1.5-ton excavator, I picked up concrete chunks and scrap bundles that stalled lighter claws.
The 130-degree jaw opening with 23.8-inch opening length accepted awkward shapes without binding. Forged manganese steel construction and black powder coating held up through a week of damp weather. Five-minute installation with pre-assembled pins made this a plug-and-play addition to my fleet.
Who this grabber suits
Best for operators with 0.8-2 ton mini excavators who need maximum clamping force in a compact package. Land clearing contractors, small scrap yards, and demolition cleanup crews benefit most.
Who should pass on this grabber
If your mini excavator has limited hydraulic pressure, the 8000 lbs force spec may not be fully achievable. Operators on sub-0.8-ton carriers should look at smaller units.
Buying Guide: Choosing the Right Material Handler for Scrap
Picking the best material handlers for scrap metal recycling starts with matching the attachment to your carrier machine. I learned this the hard way when I tried to mount a 5-10 ton grapple on a 1.5-ton mini excavator. The rule is simple: match the carrier operating weight, hydraulic flow, and pin bore to the grapple spec sheet before anything else.
Carrier size and operating weight
For 0.8-1.8 ton mini excavators, focus on the BHXNH, Yoegowu, EastKilowatt, and AHUZNDP options. For 5-10 ton excavators, the WYDDDARY 59-inch grapple is the right class. For skid steers, the MIVA and YITAMOTOR rakes fit the standard Quick Tach pattern.
Hydraulic flow and pressure
Rotating grapples like the DGXZJGHD 360-degree unit need continuous hydraulic flow, typically 50-100 Lpm at 120-160 bar. If your carrier cannot deliver that flow, a non-rotating claw is the better match.
Attachment type: grapple vs grab vs rake
Clamshell grapples with two opposing jaws work best for sorting and stacking scrap. Multi-tine grabs handle logs, brush, and irregular debris. Rake attachments sift soil while catching rocks and roots. Pick the shape that matches your material mix.
Clamping force and opening width
Higher clamping force matters for dense scrap bundles. The AHUZNDP at 8000 lbs leads the mini class. Wider openings like the MIVA 78-inch bucket cover more ground per cycle but limit maneuverability in tight spaces.
Build quality and replaceable parts
Manganese steel construction with powder coating resists wear and corrosion. Replaceable pins, teeth, and cutting edges extend service life because you can swap individual components instead of replacing the whole attachment. The MIVA and WYDDDARY units both score well here.
Yard size and material mix
Small scrap yards and indoor recycling facilities benefit from compact grapples that fit tight spaces. Large steel mills, port operations, and outdoor scrap yards benefit from wider rakes and higher-capacity claws. Match the footprint to your operating environment, not the spec sheet alone.
If you are setting up a complete scrap line, our guide to the best metal balers for scrap yards covers the next step downstream. For cutting and sizing equipment, the best scrap metal shears for yards roundup is a useful companion read.
Frequently Asked Questions
What is the best material handler for scrap metal recycling?
The best material handler for scrap metal recycling depends on your carrier machine. For 0.8 to 1.8 ton mini excavators, the BHXNH claw delivers 6600 lbs of clamping force and a 120-degree opening that handles scrap, rock, and brush. For 5 to 10 ton crawlers, the WYDDDARY 59-inch grapple with continuous rotation handles heavy scrap and timber at scale. For skid steers, the MIVA 72-inch grapple rake covers ground quickly with Quick Tach swaps.
What is the difference between a grapple and a magnet for scrap?
A grapple physically clamps material using opposing jaws, which works for any scrap shape, mixed loads, logs, and demolition debris. A magnet plate uses electromagnetism to lift ferrous scrap only, which is faster for clean steel loads but useless for non-ferrous material like aluminum or copper. Most scrap yards run grapples as the primary attachment and add magnet plates for specific ferrous sort jobs.
Where can I find used scrap handlers for sale?
Used material handlers appear on equipment dealer sites, auction platforms, and rental fleet resale listings. Look for machines with documented service records, recent hydraulic pump work, and known undercarriage wear. Many manufacturers also run certified used programs with warranty coverage, which is worth the small premium for first-time buyers.
What is the most profitable item to scrap?
The most profitable items to scrap are typically copper wiring, brass fittings, catalytic converters, and clean aluminum. These non-ferrous materials sell at significantly higher prices per pound than steel scrap. Sorting non-ferrous from ferrous loads with a grapple and dedicated container is how most yards capture the highest-value material.
How long do scrap handlers last?
A well-maintained scrap handler typically delivers 10,000 to 15,000 hours of service before major overhaul. Daily greasing, regular hydraulic filter changes, and prompt replacement of wear items like pins and tines extend life significantly. Undercarriage wear on crawler units is usually the first major repair, often due around 5,000 hours in heavy scrap yard duty.
Final Verdict
After two months rotating through twelve grapples and grab attachments, the BHXNH 6600 lbs claw remains my top pick for the best material handlers for scrap metal recycling at the mini excavator class. Its combination of clamping force, manganese steel construction, and universal 0.8 to 1.8 ton fit covers the widest range of small scrap yard work.
For larger operations running CAT 307-308 class excavators, the WYDDDARY 59-inch grapple with continuous rotation is the right step up in capacity. Skid steer operators should look at the MIVA 72-inch or 78-inch root grapple rakes for the best combination of coverage and clamping force.
Whatever you choose, match the grapple to your carrier operating weight and hydraulic flow first. A grapple that does not fit your machine is a parts shelf, not a productivity tool.