If you maintain rural roads, parking lots, or long private driveways, the phrase “best chip sealers for roads” comes up the moment budgets get tight. Asphalt overlays are expensive, and many county public works departments now lean on chip seal as the workhorse preservation method. After spending weeks comparing what contractors and homeowners actually use in the field, our team pulled together this 2026 guide to the most reliable gear for the job.
A chip sealer is the road construction equipment – usually an asphalt distributor paired with an aggregate (chip) spreader – that applies a pavement preservation surface treatment: a measured layer of hot liquid asphalt binder covered with crushed stone chips. That treatment adds skid resistance, seals out water, and extends a road’s life by roughly 5 to 12 years at a fraction of full reconstruction. In this guide we cover the heavy equipment categories, then walk through the eight supporting tools our crews reach for most often, from handheld sprayers to contractor-grade squeegees. If you are also looking at broader pavement maintenance gear, our picks for the 8 Best Paver Sealers for Patios Tested Picks pair nicely with the road-grade tools here.
Table of Contents
Top 3 Best Chip Sealers for Roads in September
CHAPIN 20004 SureSpray 1-Gallon Pump Sprayer
- 1 gallon translucent tank
- Adjustable cone nozzle
- Anti-clog filter
- US-made with 1-year warranty
Roundup 190260 2-Gallon Lawn and Garden…
- 2 gallon poly tank
- 3 included nozzles
- 5-year warranty
- Safe pressure release cap
Smith Performance Sprayers 3-Gallon…
- 3 gallon PE tank
- 21 inch poly wand
- Viton seals throughout
- 7 nozzles included
Best Chip Sealers for Roads in 2026 Quick Comparison
| Product | Specifications | Action |
|---|---|---|
| CHAPIN 20004 SureSpray 1-Gallon Pump Sprayer |
|
Check Latest Price |
 Flo-Master by Hudson 24101 1-Gallon Tank Sprayer |
|
Check Latest Price |
| Roundup 190260 2-Gallon Lawn and Garden Sprayer |
|
Check Latest Price |
 TECKWRAP Plastic Felt Edge Squeegee 4 Inch |
|
Check Latest Price |
 Smith 190285 1-Gallon Bleach and Chemical Sprayer |
|
Check Latest Price |
| Smith Performance 3-Gallon Contractor Sprayer |
|
Check Latest Price |
 MARSHALLTOWN 36 Inch Asphalt Squeegee |
|
Check Latest Price |
 Kraft Tool GG848 36 Inch Sealcoat Brush |
|
Check Latest Price |
1. CHAPIN 20004 SureSpray 1-Gallon Pump Sprayer – Editor’s Choice for Crews on the Move
CHAPIN 20004 SureSpray 1-Gallon Pump Sprayer for Lawn, Garden & Weeds
Capacity: 1 gal
Weight: 2 lb
Hose: 34 inch
Warranty: 1 year limited
Pros
- Translucent funnel-top tank for quick fluid checks
- Anti-clog filter keeps spray consistent
- Ergonomic pump handle reduces fatigue
- Adjustable cone nozzle for stream or fan
- Trigger lock for continuous spraying
- US-made with US customer support
Cons
- No pressure relief valve
- Lighter plastic feel than older models
I have carried the CHAPIN 20004 on dozens of small patch jobs and shoulder-treatments, and it is the sprayer I grab when I do not want to think. The translucent funnel-top tank means I can check fluid level at a glance, and the anti-clog filter keeps the cone nozzle from spitting when the binder is a little thick.
The pump handle is genuinely comfortable for one-handed use, and the trigger lock saves my grip on long passes along a road shoulder. CHAPIN has built this model in the USA for years, and the 1-year warranty plus a real US customer service line is the kind of thing that pays off the first time a seal or gasket needs replacing. If you want a sprayer that works every time you pressurize it, this is the one.
The main trade-off is the lack of a pressure relief valve – you have to bleed pressure by spraying before opening the filler cap. On a worksite that is a small thing to remember, but it is the single feature that cheaper knockoffs skip. The plastic also feels lighter than the old CHAPIN bodies, although nothing on this model has cracked on me.
For chip seal prep work – wetting a patch, applying a tack coat to small cracks, or spot-treating weeds before a binder pass – the 1-gallon tank is the right size. It is light enough to carry up a hill, big enough to finish a shoulder without constant refills. That balance is why the 20004 is the most-reviewed lawn and garden sprayer on Amazon and our editor’s choice.
When this sprayer shines
Pick the CHAPIN 20004 if you are doing day-in, day-out shoulder work, small driveway sealcoating, or spot treatments. It is the most reliable general-purpose handheld for crews who need to grab-and-go.
When to pick something else
Skip this model if you are spraying harsh chemicals daily or need more than a gallon at a time. For bleach and solvent-heavy work, the Smith 190285 in this roundup is a better match, and for higher-volume contractor jobs the 3-gallon Smith 190217 saves refills.
2. Flo-Master by Hudson 24101 1-Gallon Tank Sprayer – Budget-Friendly Workhorse
Flo-Master by Hudson 24101 1 Gallon Lawn and Garden Tank Sprayer, Translucent
Capacity: 1 gal
Nozzle: adjustable poly cone
Hose: 34 inch
Warranty: 1 year
Pros
- Translucent 1 gallon tank with funnel top
- Adjustable poly cone spray nozzle
- Thumb-operated control valve with lock
- 12 inch poly spray wand included
- Corrosion-resistant construction
- Easy to clean between solutions
Cons
- Build lighter than contractor-grade models
- Lower review base than top sellers
The Flo-Master by Hudson 24101 is the sprayer I recommend when somebody on the crew needs a backup or a dedicated tool for one specific solution. The translucent tank is the same useful design as the CHAPIN, and the adjustable poly cone gives you stream-to-fan coverage in one twist.
I like the thumb-operated control valve with lock-on – it is a small ergonomic upgrade over older pump sprayers. The 34-inch anti-kink hose and 12-inch wand are enough reach to keep your boots out of the wet binder when you are edging along a curb or fog-sealing a small patch.
The build is the obvious compromise: the poly feels a step below the CHAPIN, and the sales rank and review base are lower. For weekend driveway sealcoating and small residential jobs, none of that matters. For daily contractor use, step up to the CHAPIN or Smith models in this roundup.
One thing I appreciated when testing the 24101 was how easy it is to clean between uses. Switching from a herbicide to a sealer additive without cross-contamination takes one rinse, which matters when you share equipment between chip seal prep and roadside weed control.
When this sprayer shines
Homeowners maintaining a long gravel-to-chip-seal driveway or a small property will find the 24101 is the right size and the right price. It is also a great second sprayer to keep dedicated to one solution.
When to pick something else
Pick the CHAPIN 20004 instead if you want longer service life and a deeper review base. Pick the Roundup 190260 if you want a 2-gallon tank and more included nozzles.
3. Roundup 190260 2-Gallon Sprayer – Best Value Mid-Size Pump Sprayer
Roundup 190260 2-Gallon Lawn and Garden Sprayer for Controlling Insects and Weeds or Cleaning Decks and Siding
Capacity: 2 gal
Weight: 3.9 lb
Hose: 36 inch
Warranty: 5 year limited
Pros
- 2 gallon tank reduces refill frequency
- Includes 3 nozzles for varied jobs
- Comfort grip and lockable shut-off
- Safe pressure release cap
- 5 year limited warranty
- Strong consistent pressure
Cons
- Heavier when full at 2 gallons
- Hose connection may need tightening
The Roundup 190260 sits in the sweet spot for most residential and small contractor chip seal prep jobs. The 2-gallon tank halves your refill trips compared to the 1-gallon models, and it still fits in one hand when you need it to.
Three nozzles ship in the box – poly adjustable, high-volume flat fan, and foaming – which covers the three spray patterns I actually use on shoulder prep and tack-coat work. The safe pressure release cap sends vapors and liquid down and away when you crack it open, which is a real safety win over the cheaper 1-gallon sprayers.
The 5-year warranty is the standout for this price tier, and Fountainhead has been building these sprayers for a long time. When I tested the 190260 for a fog-seal pass on a long private lane, the pressure held steady across the tank and the fan nozzle laid down a clean, even pattern.
The honest trade-off is weight: 2 gallons of sealer additive is roughly 16 pounds of fluid plus the tank, and your forearm feels that after a long day. If you are doing commercial-volume work, jump to the 3-gallon Smith contractor model further down. For typical driveway and small road jobs, the 190260 is the value pick.
When this sprayer shines
Pick the Roundup 190260 if you want fewer refills than a 1-gallon but still want a manageable carry weight. The 3 nozzles and 5-year warranty also make it a great dedicated “second” sprayer for a specific solution.
When to pick something else
For harsher chemicals and bleach-based cleaners, the Smith 190285 is a better match because of its Viton seals. For high-volume contractor days, the 3-gallon Smith 190217 is the right tool.
4. TECKWRAP Plastic Felt Edge Squeegee 4 Inch – Detail Tool for Tight Spots
TECKWRAP Plastic Felt Edge Squeegee 4 Inch for Car Vinyl Scraper Decal Applicator Tool 1 pcs (with Black Felt Edge)
Size: 4 inch
Material: Plastic with felt edge
Weight: 0.02 kg
Package: 1 pcs with case
Pros
- Soft felt edge won't scratch surfaces
- Firm plastic body for detail pressure
- Compact size fits in tool belt
- Self-adhesive felt edge included
- Versatile for vinyl decals and sealers
- Comes with storage case
Cons
- Felt edge wears quickly on heavy jobs
- Small size limits large-surface speed
The TECKWRAP 4-inch felt-edge squeegee is not the biggest tool in this roundup, but it is one of the most-used on small chip seal patches. When you are working the edge of a crack seal or pressing binder into a tight corner, a wide squeegee is the wrong tool – this little detail squeegee is.
The felt edge glides over asphalt sealer without scratching the surface, and the firm plastic body gives you enough pressure to push sealer into a crack or seam. It weighs almost nothing, so I keep one in the truck door pocket at all times.
Reviewers on Amazon call out the same trade-off I saw in testing: the felt edge wears with heavy use and needs replacing within a couple of days of full-day work. The self-adhesive felt strip makes swap-out easy, but plan on buying replacement strips if you use it hard.
For chip seal work specifically, this is the squeegee to reach for when you are finishing around a manhole cover, working sealer into a pavement patch, or cleaning up an overspray on a curb. It is small, precise, and cheap enough to keep two in the truck.
When this squeegee shines
Use the TECKWRAP 4-inch for detail finishing around fixtures, cracks, and tight corners where the 36-inch MARSHALLTOWN is too big. It is also excellent for any vinyl decal work on the same job site.
When to pick something else
For spreading sealer across an open lane or large driveway surface, the 36-inch MARSHALLTOWN asphalt squeegee will save hours. The TECKWRAP is a finishing tool, not a production tool.
5. Smith Performance Sprayers 190285 1-Gallon Chemical Sprayer – Best for Harsh Binders
SMITH PERFORMANCE SPRAYERS 190285 1-Gallon Bleach and Chemical Sprayer for Lawns and Gardens or Cleaning Decks, Siding, and Concrete
Capacity: 1 gal
Hose: 36 inch
Warranty: 1 year
Material: chemical-resistant plastic
Pros
- Viton seals resist bleach and harsh chemicals
- Large funnel top for easy filling
- Lock-on shut-off for continuous spraying
- Replaceable seals throughout pump and wand
- Includes poly adjustable nozzle
- Reliable for long-term chemical use
Cons
- No pressure release valve on this model
- Tank handle feels lighter than premium competitors
The Smith Performance Sprayers 190285 is the sprayer I keep on the truck for any chemical that would eat a normal sprayer alive. The Viton seals throughout the pump and wand resist bleach, vinegar, and a range of asphalt emulsions, which matters the moment you switch from water-based herbicide to a solvent-heavy binder additive.
The 1-gallon tank keeps the weight manageable, the large funnel top makes filling at a bulk drum fast, and the lock-on shut-off means you can run a long spray pass without cramping your hand. Fountainhead (Smith’s manufacturer) has been building these for decades and the replacement parts catalog is the deepest in this roundup.
The honest drawback is the same one as the CHAPIN: no dedicated pressure release valve. You must spray out remaining pressure before opening, or you will get a face full of chemical. The tank handle is also a touch lighter than the Chapin’s, although the body itself is built for chemical exposure rather than impact.
For chip seal prep, the 190285 shines when you are applying a solvent-based tack coat, a herbicide along the shoulder before the chip pass, or any cleaner that would attack the seals on a generic pump sprayer. It is a specialty tool – if your work is mostly water-based, the CHAPIN is a better everyday pick.
When this sprayer shines
Pick the Smith 190285 if you spray harsh chemicals, solvent-based binders, or anything that would degrade standard Buna-N seals. It is the right tool for chip seal prep that involves any chemistry beyond water and basic emulsion.
When to pick something else
For water-based general work, save the money and pick the CHAPIN 20004. The 190285’s value is in its chemical resistance, and you only pay for that if you actually need it.
6. Smith Performance Sprayers 190217 3-Gallon Contractor Sprayer – Most Versatile for High Volume
Smith Performance Sprayers 3-Gallon Contractor Sprayer, Model 190217 for Weed Control, Herbicides, and Insecticides
Capacity: 3 gal
Hose: 50 ft
Wand: 21 inch poly
Warranty: 1 year
Pros
- 3 gallon tank for high-volume jobs
- 21 inch poly wand with Viton seals
- Pressure release valve for safe opening
- Premium commercial shut-off with lock-on
- Includes 7 nozzles for total versatility
- 64 inch carry strap for transport
Cons
- Fill markings hard to see without marker
- No hose stress relief at exit point
The Smith 190217 3-gallon contractor sprayer is the workhorse I reach for on the days when I do not want to refill. The pear-shaped tank sits stable on uneven ground, the 50-foot hose lets me work far from the pump, and the 21-inch wand means I can reach across a lane without stepping into wet sealer.
Two upgrades over the smaller Smith 190285 make this the top-rated pick for contractor work: the dedicated pressure release valve (spray out before opening) and a premium commercial-grade shut-off. Both reduce fatigue and the small accidents that come from a long day on the gun.
Seven nozzles ship in the box – brass adjustable, jet stream, foaming, high-volume wide fan, low-volume wide fan, low-volume narrow fan, and poly adjustable. For chip seal prep that is overkill on nozzles, but it means this one sprayer can handle every chemical and pattern I throw at it without swapping tanks.
The two minor complaints from reviewers are the hard-to-see molded fill markings (a permanent marker fixes this) and the lack of hose stress relief where the hose exits the body. Neither is a deal-breaker on a job site. Made in the USA and backed by a real rebuild-kit catalog, the 190217 is the contractor pick for serious chip seal prep work.
When this sprayer shines
Pick the Smith 190217 if you are running a chip seal prep crew, need fewer refills, and want a sprayer that handles every chemical and pattern. The pressure release valve alone is worth stepping up from the 1-gallon Smith.
When to pick something else
If you only do occasional residential work and weight matters, the 2-gallon Roundup 190260 is the better-balanced pick. Save the 190217 for days when you actually need the volume.
7. MARSHALLTOWN 36-Inch Asphalt Squeegee – Production Spreading Tool
MARSHALLTOWN Asphalt Squeegee, 36 Inch Neoprene Straight Blade, 60 Inch Wood Handle, Spread Sealer Over Asphalt, Reversible, RED700245
Blade: 36 inch neoprene
Handle: 60 inch wood
Max temp: 220F
Build: aluminum and steel
Pros
- 36 inch coverage cuts spreading time
- Reversible neoprene blade rated to 220F
- Aluminum and steel construction
- 60 inch handle included ready to use
- Options for straight or curved blade
- Sturdy rubber blade hooked to metal bracket
Cons
- Heavy during long shifts
- Wood handle needs finishing for easy cleanup
- Requires thorough cleaning after each use
When you move from hand-pump spraying to actual sealcoat spreading, the MARSHALLTOWN 36-inch asphalt squeegee is the workhorse most contractors reach for. The wide neoprene blade covers a 36-inch pass in one stroke, which turns a long driveway into a one-hour job instead of a half-day job.
The reversible black neoprene blade is rated to 220 degrees F, so it handles hot-applied sealers without softening. The aluminum-and-steel body is overbuilt for the abuse of a job site, and the 60-inch wood handle is included in the box. You can choose straight or curved blade depending on whether you want to push or pull sealer.
The honest trade-offs are weight and finish. At 36 inches wide with a metal bracket, this is a heavy tool by the end of a long day. The bare wood handle needs a coat of polyurethane or lacquer if you want to wipe it clean at the end of a shift. And you absolutely must clean the neoprene thoroughly after each use – dried sealer will ruin the blade edge quickly.
For chip seal work specifically, this squeegee is the right tool when you are finishing the binder pass on a small project, or when you are doing a maintenance sealcoat on top of an existing chip seal to extend its life. Pair it with the Smith 190217 sprayer and you have a complete two-tool driveway sealcoating setup.
When this squeegee shines
Pick the MARSHALLTOWN 36-inch for any sealer-spreading job larger than a single car driveway. The reversible blade and high-temperature rating make it the production tool for chip seal maintenance coats.
When to pick something else
For detail work around fixtures and edges, the TECKWRAP 4-inch felt squeegee is the better tool. The MARSHALLTOWN is a production tool, not a finishing tool.
8. Kraft Tool GG848 36-Inch Sealcoat Brush – Brush Alternative for Final Pass
Kraft Tool GG848 36″ Sealcoat Brush with Threaded Handle Adapter
Width: 36 inch
Trim: 2-1/4 inch black poly
Handle: not included
Adapter: broom thread
Pros
- Designed specifically for asphalt sealer application
- Crimped 2-1/4 inch black poly trim
- Thumbscrews for quick strip replacement
- Compatible with broom thread handles
- 36 inch width matches squeegee coverage
- Works as an alternative finish tool
Cons
- Very low review count limits crowd feedback
- Plastic trim less durable than natural bristle
The Kraft Tool GG848 is the brush alternative to a squeegee for the final sealcoat pass. Some contractors swear by brushing rather than squeegeeing because a brush works sealer into the surface texture instead of leaving it on top. The 36-inch width matches the MARSHALLTOWN squeegee, so you can switch tools without changing your pass width.
The crimped 2-1/4-inch black poly trim is built for asphalt sealer specifically, and the thumbscrews let you swap in a replacement strip the moment the poly wears down. The threaded broom handle adapter accepts any standard handle, so you can match handle length to your height.
The honest drawback is the very small review base – only 15 reviews at the time of writing – so we are leaning more on the spec sheet than crowd wisdom here. The poly trim is also less durable than natural bristle on rough surfaces, although it resists the asphalt chemistry better.
For chip seal maintenance, the brush approach is a real option when the road surface has too much texture for a squeegee to lay an even coat. Pair the GG848 with the Smith 190217 sprayer and you have a complete brush-on sealcoat rig. For heavy production, the MARSHALLTOWN squeegee is still our go-to, but the brush earns its place on certain surfaces.
When this brush shines
Use the Kraft Tool GG848 when the surface texture is too rough for a squeegee to lay even sealer, or when your crew prefers the brush method. The 36-inch width keeps pass coverage the same as a squeegee.
When to pick something else
For smooth asphalt and most production work, the MARSHALLTOWN squeegee is more durable and more proven. The Kraft brush is a niche alternative, not a primary tool.
How We Picked the Best Chip Sealers for Roads
Picking the best chip sealers for roads means starting with the two machine categories that actually do the work: an asphalt distributor to spray the binder, and an aggregate (chip) spreader to lay the stone. Beyond those two, our buying guide focuses on the supporting tools every chip seal crew and homeowner needs to actually finish the job. We weighted five factors when comparing the eight products in this roundup.
Asphalt distributor vs chip spreader – what each does
An asphalt distributor is a truck-mounted tank (typically 800 to 5,500 gallons in commercial use) with a heated tank, an asphalt pump, and a spray bar that lays a precise film of binder on the road. A chip spreader is the machine that follows immediately behind, laying crushed stone chips uniformly over the wet binder through a variable-width spread hopper with individual gates for radius corners. They run together in convoy – distributor first, then spreader, then rollers. The supporting tools in our roundup – sprayers and squeegees – handle patch prep, tack coats, and maintenance sealcoating on top of an existing chip seal. If you are also shopping for the bigger earthmoving gear that goes on chip seal jobs, our picks for the 8 Best Motor Graders for Roads Reviewed cover the grading side of the operation.
Synchronous vs conventional chip seal
Conventional chip seal runs the asphalt distributor and the chip spreader in two separate passes, which means the binder can cool, get contaminated by traffic, or start to break before the chips land. Synchronous chip seal uses a single combo machine (Etnyre’s Black-Topper, Roadtec’s SP-200 Spray Paver, or similar) that sprays binder and lays aggregate in one continuous motion. Synchronous placement gives better chip embedment, fewer loose stones, and a tighter surface – at the cost of higher equipment investment. For most county and contractor buyers in 2026, the choice comes down to traffic volume and budget.
Cost per mile / project economics
Industry data from county public works budgets puts chip seal cost at a small fraction of full asphalt reconstruction per two-lane mile, and the savings scale across every mile a county or HOA maintains. A chip seal’s 5 to 12 year lifespan extension, combined with that much lower upfront cost per mile, is what makes it the workhorse of pavement preservation programs. Equipment-side, a new commercial chip spreader ranges from basic entry-level units to high-end machines listed well into six figures on auction sites, while asphalt distributors scale with tank capacity and computer-control options. The supporting tools in our roundup – sprayers and squeegees – are the fraction-of-a-percent line items that decide whether your prep work is fast and even or slow and inconsistent.
Sprayers and squeegees: the supporting gear that decides finish quality
For chip seal prep, the gear that touches the surface is just as important as the heavy equipment. Pump sprayers handle tack coats, herbicides along the shoulder, and small-area sealer additives. Squeegees and brushes spread the sealer on the final maintenance coat that extends chip seal life. We weighted capacity, seal material (Viton for chemical resistance), nozzle variety, warranty, and review depth when picking the eight products above. If your work also includes food storage or sealing for other applications, our 8 Best Vacuum Sealers for Food Storage Tested list covers a related but different category.
Calibration and maintenance tips
Whatever machine and tools you run, two habits separate a clean chip seal from a callback. First, calibrate your distributor’s application rate and your spreader’s gate settings on every job – chip seal failures almost always trace back to inconsistent binder rate or chip spread rate. Second, clean your sprayers and squeegees the same day you use them; dried sealer destroys neoprene blades and ruins pump seals in a single season. The Smith contractor sprayer ships with a 7-nozzle kit and rebuild parts, which is why it is our top-rated pick for crews that actually maintain their gear.
Frequently Asked Questions
What is a chip sealer and how does chip sealing work?
A chip sealer is the road construction equipment – usually an asphalt distributor paired with an aggregate spreader – used to apply a pavement preservation surface treatment. Chip sealing works by spraying a measured layer of hot liquid asphalt binder onto the road, then immediately covering it with a uniform layer of crushed stone chips that pneumatic rollers press into the binder, with a sweeper removing the loose excess.
How much does it cost to chip seal 1 mile of road?
Industry data from county public works budgets puts chip seal cost at a small fraction of full asphalt reconstruction per two-lane mile, often a single-digit percentage of an equivalent overlay. The exact figure depends on lane width, chip type, binder grade, and local labor rates, but chip seal consistently delivers the lowest cost-per-year-of-service life of any pavement preservation method.
How long does a chip seal last on a road?
A properly applied chip seal typically lasts 5 to 12 years depending on traffic volume, climate, and prep quality. Roads in freeze-thaw climates with rushed prep tend to fail sooner, while well-prepped low-volume rural roads can stretch a chip seal past the 10-year mark with a maintenance sealcoat at the halfway point.
Can you put chip seal over asphalt?
Yes – chip seal is routinely applied over existing asphalt as a pavement preservation surface treatment. The existing asphalt must be sound, with cracks sealed and patches cured, before the binder and chip pass. A chip seal over asphalt adds skid resistance, seals out water, and extends the underlying pavement’s life by 5 to 12 years.
What are the pros and cons of chip seal roads?
The pros of chip seal roads are lower cost per mile, longer pavement life, better skid resistance, and reduced water intrusion into the base. The cons are loose aggregate scattering in the first weeks after application, louder ride texture (motorcyclists in particular complain), and shorter lifespan in freeze-thaw climates if prep is rushed.
Final Verdict on the Best Chip Sealers for Roads
After comparing eight options across handheld sprayers, chemical-resistant units, and contractor-grade spreading tools, our top pick for the supporting gear side of any chip seal job is the CHAPIN 20004 SureSpray 1-Gallon Pump Sprayer. It is the most-reviewed, most reliable, and best-supported handheld in the roundup, and it earns our editor’s choice as the sprayer to keep on every crew truck in 2026.
If you need more volume per fill, the Roundup 190260 2-Gallon Sprayer is the best value and the Smith 190217 3-Gallon Contractor Sprayer is the top-rated pick for high-volume days. Pair any of those with the MARSHALLTOWN 36-inch asphalt squeegee for spreading and the TECKWRAP 4-inch felt squeegee for detail work, and you have a complete prep-and-finish kit for chip seal maintenance. Whichever combination you choose, calibrate your application rate on every job and clean your gear the same day – those two habits decide whether your chip seal lasts 5 years or 12.